 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| cat.no.p05e-16 ceramic filters (cerafilr)/ ceramic discriminators for communications equipment ! note p05e.pdf nov.24,2011 ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering.
eu rohs compliant s all the products in this catalog comply with eu rohs. s eu rohs is "the european directive 2011/65/eu on the restriction of the use of certain hazardous substances in electrical and electronic equipment." s for more details, please refer to our website 'murata's approach for eu rohs' (http://www.murata.com/info/rohs.html). ! note p05e.pdf nov.24,2011 ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. ! note p05e.pdf nov.24,2011 ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. cerafilr and "cerafil" in this catalog are the trademarks of murata manufacturing co., ltd. contents part numbering 2 products guide 4 cerafilr khz smd type sfpka series 5 cerafilr khz smd type cfukg series 7 cerafilr khz smd type cfukg_x series 9 cerafilr khz smd type cfukf series 11 cerafilr khz smd type cfwka series 13 cerafilr khz smd type cfwka_y series 15 khz smd type cerafilr notice 17 cerafilr mhz smd type sfecf10m7 series 21 cerafilr mhz smd type sfsce10m7 series 23 mhz smd type cerafilr notice 25 smd type cerafilr standard land pattern dimensions 31 khz smd type cerafilr packaging 32 mhz smd type cerafilr packaging 34 cerafilr plastic case general use cfula series 35 cerafilr plastic case general use cfwla series 37 cerafilr plastic case miniaturized type cfulb series 39 cerafilr plastic case miniaturized type cfwlb series 41 cerafilr plastic case group delay flat type cfula_y series 43 cerafilr plastic case group delay flat type cfwla_y series 45 cerafilr plastic case group delay flat type miniaturized type cfulb_y series 47 cerafilr plastic case group delay flat type cfwlb_y series 49 plastic case type cerafilr minimum quantity/notice 51 khz type ceramic discriminators 52 mhz type ceramic discriminators 65 ceramic discriminators notice 70 ceramic discriminators standard land pattern dimensions/packaging 74 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ! note p05e.pdf nov.24,2011 ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 2 o part numbering y e wrt u q ka p 455k d4a -r0 sf s0 cf e 10m7 df00 -r0 sf (part number) qproduct id woscillating/element ceramic filters (cerafilr) for if cf sf u w p e s ceramic filters three-digit alphanumerics express pass bandwidth, center frequency tolerance and design type. product id tproduct specification d4a code product specification rnominal center frequency expressed by four-digit alphanumerics. the unit is hertz (hz). if the unit is "khz", it is expressed by three figures plus "k." if the unit is "mhz", a decimal point is expressed by the capital letter "m." p is "a" or subsequent code, which indicates the size. it varies depending on vibration mode and number of elements. chip type is only applied for sf series. expressed by three-digit alphanumerics. yindividual specification 001 code individual specification code bulk embossed taping ?=180mm embossed taping ?=330mm upackaging -b0 -r0 -r1 code packaging oscillating/element chip type lead type estructure/size cp/kp lp code structure/size 4 elements area expansion mode 6 elements area expansion mode 4 elements area expansion mode 2 elements thickness expansion mode 2 elements thickness shear mode embossed taping is applied to chip type. sfe/s/j series are expressed by four-digit alphanumerics. sfe/s/j series are expressed by two-digit alphanumerics. with standard type, y is omitted. ! note p05e.pdf nov.24,2011 ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 3 e cb w s r 10m7 t gf u -r0 y 001 q cd (part number) qproduct id woscillation ceramic discriminators for if (mhz) cd discriminators product id tproduct specification gf code product specification with non-standard products, an alphanumerics indicating "individual specification" is added between " y ic" and " u packaging." estructure/size embossed taping ?=180mm yic 001 code ic applicable ic control code upackaging -r0 code packaging thickness shear mode s code oscillation chip type cp code structure/size p is expressed "a" or subsequent code, which indicates the size. two-digit alphanumerics express type, center frequency, rank, others rnominal center frequency expressed by four-digit alphanumerics. the unit is in hertz (mhz). decimal point is expressed by capital letter "m." y a e lb w b r 450k t c u x i 16 o -b0 q cd (part number) qproduct id ceramic discriminators for if (khz) cd ceramic discriminators quadrature detection product id tdetection c code detection embossed taping is applied to chip type. with non-standard products, one letter indicating "individual specification" is added between " i applicable ic" and " o package specification code." p is "a" or subsequent code, which indicates the size. it varies depending on vibration mode and number of elements. standard application with coil yapplication a l code application low-capacitance high-capacitance uelement type x y code element type applicable ic control code iic 16 code ic bulk embossed taping ?=180mm embossed taping ?=330mm opackaging -b0 -r0 -r1 code packaging area expansion mode woscillating b code oscillating chip type lead type estructure/size cp/kp lp code structure/size rnominal center frequency expressed by four-digit alphanumerics. the unit is in hertz (hz). capital letter "k" following three figures expresses the unit of "khz." ! note p05e.pdf nov.24,2011 ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 4 type series applications 6db bandwidth (khz) min. general use attenuation (db) min. osmd type (khz) high selectivity series (plastic case type) narrow bandwidth gdt flat type miniature series (plastic case type) gdt flat type miniature series (plastic case type) gdt flat type high selectivity smd series (plastic case type) high selectivity smd series (plastic case type) sfpka455km (4 elements) cfukg455km (4 elements) cfukg455kmx (4 elements) cfukf455km (4 elements) cfwka450kbfy (6 elements) cfwka450km (6 elements) olead type (khz) 27 (g to h; 25) 27 (g; 25) 27 (g to h; 25) 25 (d to e; 23) 45 50 a 17.5 C C C o C C b 15 C C C o o C c 12.5 C C C o C C d 10 o o C o C o e 7.5 o o o o C o f 6 o o o C C o g 4.5 o o o C C o h 3 o C o C C C j 2 C C C C C C k 1.5 C C C C C C l 1 C C C C C C type series applications 6db bandwidth (khz) min. general use attenuation (db) min. within 455 80 or 100khz within 45580 or 100khz high selectivity low profile series high selectivity miniature series gdt flat type series gdt flat type miniature series cfula455km (4 elements) cfwla455km (6 elements) cfulb455km (4 elements) cfwlb455km (6 elements) cfula455kmy (4 elements) cfwla455kmy (6 elements) cfulb455kmy (4 elements) cfwlb455kmy (6 elements) 27 35 (h, j; 60) 27 35 (h, j; 55) 25 (d to g; 23) 40 25 (d to g; 23) 40 (f; 35) a 17.5 C C C C C o C o b 15 o o o o o o o o c 12.5 o o o o o o o o d 10 o o o o o o o o e 7.5 o o o o o o o o f 6 o o o o o o o o g 4.5 o o o o o o o o h 3 o o o o C C C C j 2 C o o o C C C C k 1.5 C C C C C C C C l 1 C C C C C C C C (g; 25) (h; 35) (g; 25) (h, j; 35) products guide ceramic filters (cerafil r ) for communications equipment cerafil r khz smd type sfpka series the sfpka series is comprised of small, high-performance, economical, thin (5.0mm) lters consisting of 4 ceramic elements. their innovative construction is perfect for shrinking mobile communication products such as cordless phones, pagers and transceivers. c features 1. the lters are mountable by automatic placers. 2. the lters can be re ow soldered and withstand washing. 3. they are slim, at only 5.0mm maximum thickness. 4. the bandwidth ranges from d to h. 5. operating temperature range: -20 to +80 (?) storage temperature range: -40 to +85 (?) 7.50.3 5.0 max. 3.00.3 8.4 max. 2.00.3 1.50.3 7.00.3 0.90.1 marking eiaj code 2.00.3 (1) (2) (3) 1.50.3 1.60.3 connection (1): input (2): ground (3): output (in mm) part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) ripple (db) input/output impedance (ohm) sfpka455kd4a-r1 455 ?.5khz fn?0.0 min. fn?0.0 max. [within 40db] 27 min. [within fn?00khz] 4.0 max. [at minimum loss point] 2.0 max. [within fn?khz] 1500 sfpka455ke4a-r1 455 ?.5khz fn?.5 min. fn?5.0 max. [within 40db] 27 min. [within fn?00khz] 6.0 max. [at minimum loss point] 1.5 max. [within fn?khz] 1500 sfpka455kf4a-r1 455 ?.5khz fn?.0 min. fn?2.5 max. [within 40db] 27 min. [within fn?00khz] 6.0 max. [at minimum loss point] 1.5 max. [within fn?khz] 1500 sfpka455kg1a-r1 455 ?.0khz fn?.5 min. fn?0.0 max. [within 40db] 25 min. [within fn?00khz] 6.0 max. [at minimum loss point] 1.5 max. [within fn?khz] 1500 sfpka455kh1a-r1 455 ?.0khz fn?.0 min. fn?.0 max. [within 40db] 35 min. [within fn?00khz] 6.0 max. [at minimum loss point] 1.5 max. [within fn?khz] 2000 center frequency (fo) de ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. for safety purposes, connect the output of lters to the if ampli er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. rg+r1=r2=input/output impedance e1: s.s.g. output voltage e1 r1 rg s.s.g. 0dbm (1) (2) (3) r2 e2 rf voltmeter (1): input (2): ground (3): output c test circuit p05e.pdf nov.24,2011 5 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. this catalog has only typical speci cations because there is no space for detailed speci cations. therefore, please review our product speci cations or consult the approval sheet for product speci cations before ordering. 1 100 40 30 20 10 0 attenuation (db) g.d.t. (sec.) 430 455 480 frequency (khz) 90 80 70 60 50 0 240 280 320 360 400 40 80 120 160 200 c frequency characteristics sfpka455ke4a-r1 100 40 30 20 10 0 attenuation (db) 200 frequency (khz) 90 80 70 60 50 300 400 500 600 700 800 900 1000 sfpka455ke4a-r1 p05e.pdf nov.24,2011 6 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 1 ceramic filters (cerafil r ) for communications equipment cerafil r khz smd type cfukg series the cfukg series is comprised of small, high-performance, thin (4.0mm) ? lters consisting of 4 ceramic elements. their innovative construction is perfect for shrinking mobile communication products such as pocket pagers and cellular phones. c features 1. the ? lters are mountable by automatic placers. 2. the ? lters can be re? ow soldered and withstand washing. 3. they are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling ? exible pcb design. 4. the bandwidth ranges from d to g. 5. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 1.50.3 3.00.3 1.00.1 4.00.3 6.50.3 7.5 max. c0.5 1.20.1 4.0 max. 1.00.1 (in mm) connection (1): input (2): output (3): ground 1.00.3 1.00.3 1.50.3 6.00.3 (1) (2) (3) marking eiaj code part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) ripple (db) input/output impedance (ohm) cfukg455kd4a-r0 455 1.5khz fn10.0 min. fn20.0 max. [within 40db] 27 min. [within fn100khz] 4.0 max. [at minimum loss point] 2.0 max. [within fn7khz] 1500 cfukg455ke4a-r0 455 1.5khz fn7.5 min. fn15.0 max. [within 40db] 27 min. [within fn100khz] 6.0 max. [at minimum loss point] 1.5 max. [within fn5khz] 1500 cfukg455kf4a-r0 455 1.5khz fn6.0 min. fn12.5 max. [within 40db] 27 min. [within fn100khz] 6.0 max. [at minimum loss point] 1.5 max. [within fn4khz] 1500 cfukg455kg1a-r0 455 1.0khz fn4.5 min. fn10.0 max. [within 40db] 25 min. [within fn100khz] 6.0 max. [at minimum loss point] 1.5 max. [within fn3khz] 1500 center frequency (fo) de? ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 rg s.s.g. 0dbm r1 rf voltmeter connection (1): input (2): output (3): ground (2) (3) (1) r2 e2 rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 7 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 2 100 40 30 20 10 0 attenuation (db) 0 100 200 300 400 g.d.t. (sec.) 430 455 480 frequency (khz) 90 80 70 60 50 c frequency characteristics cfukg455ke4a-r0 100 40 30 20 10 0 attenuation (db) 200 frequency (khz) 90 80 70 60 50 300 400 500 600 700 800 900 1000 cfukg455ke4a-r0 p05e.pdf nov.24,2011 8 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 2 ceramic filters (cerafil r ) for communications equipment cerafil r khz smd type cfukg_x series the cfukg_x series is comprised of small, high- performance, thin (4.0mm) ? lters consisting of 4 ceramic elements. the ? lters exhibit an extremely ? at gdt characteristic combined with a narrow bandwidth. the ? lters are recommended for narrow band digital communication applications. c features 1. the ? lters are mountable by automatic placers. 2. the ? lters can be re? ow soldered and withstand washing. 3. they are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling ? exible pcb design. 4. the bandwidth ranges from e to h. 5. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 1.50.3 3.00.3 1.00.1 4.00.3 6.50.3 7.5 max. c0.5 1.20.1 4.0 max. 1.00.1 (in mm) connection (1): input (2): output (3): ground 1.00.3 1.00.3 1.50.3 6.00.3 (1) (2) (3) marking eiaj code part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) ripple (db) gdt deviation (s) input/output impedance (ohm) cfukg455ke4x-r0 455 1.5khz fn7.5 min. fn17.5 max. [within 40db] 27 min. [within fn100khz] 6.0 max. [at minimum loss point] 1.0 max. [within fn5khz] 25.0 max. [within fn5khz] 1500 cfukg455kf4x-r0 455 1.5khz fn6.0 min. fn15.0 max. [within 40db] 27 min. [within fn100khz] 6.0 max. [at minimum loss point] 1.0 max. [within fn4khz] 25.0 max. [within fn4khz] 1500 cfukg455kg1x-r0 455 1.0khz fn4.5 min. fn12.5 max. [within 40db] 25 min. [within fn100khz] 6.0 max. [at minimum loss point] 1.0 max. [within fn3khz] 25.0 max. [within fn3khz] 1500 CFUKG455KH1X-R0 455 1.0khz fn3.0 min. fn10.0 max. [within 40db] 25 min. [within fn100khz] 7.0 max. [at minimum loss point] 1.0 max. [within fn2khz] 25.0 max. [within fn2khz] 1500 center frequency (fo) de? ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 rg s.s.g. 0dbm r1 rf voltmeter connection (1): input (2): output (3): ground (2) (3) (1) r2 e2 rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 9 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 3 100 40 30 20 10 0 attenuation (db) 0 50 100 150 200 g.d.t. (sec.) 430 455 480 frequency (khz) 90 80 70 60 50 c frequency characteristics cfukg455ke4x-r0 100 40 30 20 10 0 attenuation (db) 200 frequency (khz) 90 80 70 60 50 300 400 500 600 700 800 900 1000 cfukg455ke4x-r0 p05e.pdf nov.24,2011 10 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 3 ceramic filters (cerafil r ) for communications equipment cerafil r khz smd type cfukf series the cfukf series is comprised of small, high-performance, thin (4.0mm) ? lters consisting of 4 ceramic elements. the ? lters exhibit an extremely ? at gdt characteristic. the ? lters are recommended for digital communication applications and are perfect in hand-held cellular phones, etc. c features 1. the ? lters are mountable by automatic placers. 2. the ? lters can be re? ow soldered and withstand washing. 3. they are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling ? exible pcb design. 4. the bandwidth ranges from a to e. 5. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 1.50.3 3.00.3 1.00.1 4.00.3 6.50.3 7.5 max. c0.5 1.20.1 4.0 max. 1.00.1 (in mm) connection (1): input (2): output (3): ground 1.00.3 1.00.3 1.50.3 6.00.3 (1) (2) (3) marking eiaj code part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) ripple (db) gdt deviation (s) input/output impedance (ohm) cfukf455ka2x-r0 455 2.0khz fn17.5 min. fn40.0 max. [within 40db] 25 min. [within fn100khz] 4.0 max. [at minimum loss point] 1.0 max. [within fn12khz] 15.0 max. [within fn12khz] 1000 cfukf455kb4x-r0 455 1.5khz fn15.0 min. fn35.0 max. [within 40db] 25 min. [within fn100khz] 5.0 max. [at minimum loss point] 1.0 max. [within fn10khz] 15.0 max. [within fn10khz] 1000 cfukf455kc4x-r0 455 1.5khz fn12.5 min. fn30.0 max. [within 40db] 25 min. [within fn100khz] 6.0 max. [at minimum loss point] 1.0 max. [within fn8khz] 15.0 max. [within fn8khz] 1000 cfukf455kd1x-r0 455 1.0khz fn10.0 min. fn25.0 max. [within 40db] 23 min. [within fn100khz] 7.0 max. [at minimum loss point] 1.0 max. [within fn7khz] 20.0 max. [within fn7khz] 1500 cfukf455ke1x-r0 455 1.0khz fn7.5 min. fn20.0 max. [within 40db] 23 min. [within fn100khz] 8.0 max. [at minimum loss point] 1.0 max. [within fn5khz] 20.0 max. [within fn5khz] 1500 center frequency (fo) de? ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 rg s.s.g. 0dbm r1 rf voltmeter connection (1): input (2): output (3): ground (2) (3) (1) r2 e2 rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 11 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 4 100 40 30 20 10 0 attenuation (db) 0 50 100 150 200 g.d.t. (sec.) 430 455 480 frequency (khz) 90 80 70 60 50 c frequency characteristics cfukf455ke1x-r0 100 40 30 20 10 0 attenuation (db) 200 frequency (khz) 90 80 70 60 50 300 400 500 600 700 800 900 1000 cfukf455ke1x-r0 p05e.pdf nov.24,2011 12 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 4 ceramic filters (cerafil r ) for communications equipment cerafil r khz smd type cfwka series the cfwka series is comprised of small, high-performance, thin (3.0mm) ? lters consisting of 6 ceramic elements. the ? lters are recommend for pager or hand-held cellular phones. c features 1. the ? lters are mountable by automatic placers. 2. the ? lters can be re? ow soldered. 3. they are slim, at only 3.0mm maximum thickness. 4. the ? lters are wide bandwidth, ? at gdt within pass band. 5. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) marking 6.5 7.5 max. 3.0max. 11.5 5.5 3.0 1.20.1 1.50.3 1.20.1 1.20.1 1.50.3 1.20.1 c0.3 3.0 3.0 5.5 dot marking sealing sealing : input : output : ground (1) (1) (2) (3)(4) (2) (4) (3) eiaj code tolerance 0.3mm in mm () part number nominal center frequency (fn) (khz) 3db bandwidth (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) stop band att.(2) (db) insertion loss (db) ripple (db) input/output impedance (ohm) cfwka450kdfa-r0 450.0 - fn10.0 min. fn20.0 max. [within 50db] 50 min. [within fn100khz] - 4.0 max. [at minimum loss point] 3.0 max. [within fn7khz] 1500 cfwka450kefa-r0 450.0 - fn7.5 min. fn15.0 max. [within 50db] 50 min. [within fn100khz] - 6.0 max. [at minimum loss point] 3.0 max. [within fn5khz] 1500 cfwka450kefa001-r0 450.0 fn6.5 min. - fn15.0 max. [within 50db] 55 min. [fn18 to 33khz] 50 min. [within fn100khz] 4.0 max. [at fn] 3.0 max. [within fn6.5khz] 1500 cfwka450kffa-r0 450.0 - fn6.0 min. fn12.5 min. [within 50db] 50 min. [within fn100khz] - 6.0 max. [at minimum loss point] 3.0 max. [within fn4khz] 1500 cfwka450kgfa-r0 450.0 - fn4.5 min. fn11.0 max. [within 50db] 50 min. [within fn100khz] - 6.0 max. [at minimum loss point] 2.0 max. [within fn3khz] 1500 for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 rg s.s.g. 0dbm r1 rf voltmeter connection (1): input (2): output (3)(4): ground (2) (4) (1) r2 e2 (3) rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 13 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 5 frequency (khz) attenuation (db) g.d.t. ( sec.) 400 300 200 100 0 440.0 450.0 460.0 0 4 8 12 16 20 24 28 32 36 40 c frequency characteristics cfwka450kefa001-r0 10 0 20 30 40 50 60 70 80 90 100 430 455 480 frequency (khz) attenuation (db) cfwka450kefa001-r0 frequency (khz) attenuation (db) 200 300 400 500 600 700 800 900 1000 0 10 20 30 40 50 60 70 80 90 100 cfwka450kefa001-r0 p05e.pdf nov.24,2011 14 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 5 ceramic filters (cerafil r ) for communications equipment cerafil r khz smd type cfwka_y series the cfwka_y series is comprised of small, high- performance, thin (3.0mm) ? lters consisting of 6 ceramic elements. the ? lters are recommend for digital communication applications and are perfect in hand-held cellular phones. c features 1. the ? lters are mountable by automatic placers, and can be re? ow soldered. 2. they are slim, at only 3.0mm maximum thickness. 3. the ? lters are wide bandwidth, ? at gdt within pass band. 4. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) y50 b 1 6.5 7.5 max. 3.0 max. 11.5 5.5 3.0 1.20.1 1.50.3 1.20.1 1.20.1 1.50.3 1.20.1 c0.3 3.0 3.0 5.5 dot marking sealing sealing tolerance 0.3mm in mm : input : output : ground (1) (2) (4) (3) eiaj code () (1) (2) (3)(4) part number nominal center frequency (fn) (khz) 3db bandwidth (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) spurious response (db) gdt deviation (s) input/output impedance (ohm) cfwka450kbfy001-r0 450.0 fn11.5 min. fn13.0 min. fn30.0 max. [within 50db] 45 min. [within fn100khz] 4.0 max. [at minimum loss point] 20 min. [within 0.1 to 1.0mhz] 30.0 max. [within fn10khz] 1000 for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 rg s.s.g. 0dbm r1 rf voltmeter connection (1): input (2): output (3)(4): ground (2) (4) (1) r2 e2 (3) rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 15 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 6 attenuation (db) g.d.t. ( sec.) 200 150 100 50 0 420 430 440 450 460 470 480 frequency (khz) 0 2 4 6 8 10 12 14 16 18 20 c frequency characteristics frequency (khz) attenuation (db) 200 300 400 500 600 700 800 900 1000 0 10 20 30 40 50 60 70 80 90 100 p05e.pdf nov.24,2011 16 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 6 khz smd type cerafil r notice continued on the following page. filter is soldered twice within the following temperature conditions. 1. standard reflow soldering conditions 2. wash (1) reflow electrode is directly soldered with the tip of soldering iron at +3505c for 3.00.5 seconds. (2) soldering iron do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (3) other s ) m m e r s i o n 7 a s h 2 minutes max. in above solvent at +60c max. s 3 h o w e r o r 2 i n s e 7 a s h 2 minutes max. in above solvent at +60c max. cfc alternatives (hcfc series), isopropyl alcohol (ipa), 7 a t e r $ e m i n e r a l i z e d 7 a t e r # l e a n i n g 7 a t e r 3 o l u t i o n (cleanthrough-750h, pine alpha 100s), silicon 4 e c h n o c a r e & 2 7 3. coating in case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. (1) cleaning solvent (2) cleaning conditions s 7 h e n c o m p o n e n t s a r e i m m e r s e d i n s o l v e n t b e s u r e t o maintain the temperature of components below the temperature of solvent. s 0 l e a s e d o n o t u s e u l t r a s o n i c c l e a n i n g s 4 o t a l w a s h i n g t i m e s h o u l d b e m i n u t e s m a x i m u m s 0 l e a s e e n s u r e t h e c o m p o n e n t i s t h o r o u g h l y e v a l u a t e d i n your application circuit. s 0 l e a s e d o n o t u s e c h l o r i n e p e t r o l e u m o r a l k a l i c l e a n i n g solvent. s ) f y o u p l a n t o u s e a n y o t h e r t y p e s o f s o l v e n t s p l e a s e consult with murata or murata representative prior to using. (3) notice o soldering and mounting 0 e a k (260c max.) heating (230c) gradual cooling pre-heating (150-180c) 100 230 260 temperature (c) 60-120 sec. s e c max. 30 sec. min. 120 sec. min. c sfpka/cfukg/cfukf series notice p05e.pdf nov.24,2011 17 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. khz smd type cerafil r notice o storage and operating conditions o rating the component may be damaged if excessive mechanical stress is applied. o handling 1. if the component is cleaned, please confirm that the reliability has not been degraded. 2. the components, packed in a moisture-proof bag (dry pack), are sensitive to moisture. the following treatment is required before applying reflow soldering, to avoid package cracks or reliability degradation caused by thermal stress. when unpacked, store the component in an atmosphere of below 25c and below 65%r.h., and solder within 48 hours. 3. for safety purposes, connect the output of filters to the if amplifier through a d.c. blocking capacitor. avoid applying a direct current to the output of ceramic filters. 1. product storage condition please store the products in a room where the temperature/humidity is stable, and avoid such places where there are large temperature changes. please store the products under the following conditions: temperature: -10 to +40c humidity: 15 to 85% r.h. 2. expiration date on storage expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. please use the products within six months after delivery. if you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. please confirm solderability and characteristics for the products regularly. 3. notice on product storage (1) please do not store the products in a chemical atmosphere (acids, alkali, bases, organic gas, sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) please do not drop the products to avoid cracking of ceramic element. 4. other please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. continued from the preceding page. p05e.pdf nov.24,2011 18 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. khz smd type cerafil r notice continued on the following page. filter is soldered twice within the following temperature conditions. 1. standard reflow soldering conditions (1) reflow electrode is directly soldered with the tip of soldering iron at +3505c for 3.00.5 seconds. (2) soldering iron do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (3) other o soldering and mounting peak (260c max.) heating (230c) gradual cooling pre-heating (150-180c) 100 230 260 temperature (c) 60-120 sec. 40 sec. max. 30 sec. min. 120 sec. min. do not clean or wash the component as it is not hermetically sealed. 2. wash do not apply conformal coating onto the component as it's not hermetically sealed. 3. coating o storage and operating conditions 1. product storage condition please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. please store the products under the following conditions: temperature: -10 to + 40c humidity: 15 to 85% r.h. 2. expiration date on storage expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. please use the products within six months after delivery. if you store the products for a long time (more than six months), use carefully because the solderability may be degraded due to storage under poor conditions. please confirm solderability and characteristics for the products regularly. 3. notice on product storage (1) please do not store the products in a chemical atmosphere (acids, alkali, bases, organic gas, sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) please do not drop the products to avoid cracking of ceramic element. 4. other please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. c cfwka series notice p05e.pdf nov.24,2011 19 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. khz smd type cerafil r notice o rating the component may be damaged if excessive mechanical stress is applied. o handling for safety purposes, connect the output of filters to the if amplifier through a d.c. blocking capacitor. avoid applying a direct current to the output of ceramic filters. continued from the preceding page. p05e.pdf nov.24,2011 20 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. ceramic filters (cerafil r ) for communications equipment cerafil r mhz smd type sfecf10m7 series sfecf10m7 series for fm receivers are small, high-performance and super thin (1.4mm max.) lters. the piezoelectric element is sandwiched by the ceramics substrate. they have 1.4mm max. thickness and a small mounting area (3.45x3.1mm). sfecf series and cdscb series (mhz discriminator) enable customers to make vics/rke/tpms set very thin and small. c features 1. the lters are mountable by automatic placers. 2. they are slim, at only 1.4mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling exible pcb design. 3. various bandwidths are available. select a suitable type in accordance with the desired selectivity. 4. operating temperature range: -20 to +80 (?)(standard type) -40 to +85 (?)(high-reliability type) storage temperature range: -40 to +85 (?)(standard type) -55 to +85 (?)(high-reliability type) 0.750.3 (in mm) 1.30.1 3.10.2 3.450.2 (0.6) (0.6) (0.6) (1.28) (1.28) 0 to 0.4 (6) (1.28)(1.28) 0.650.3 0.850.3 0.850.3 0 to 0.35 0 to 0.35 0 to 0.4 (5) (4) (1) (2) (3) 0.650.3 0.3 min. 0.3 min. : eiaj monthly code : reference ( ) (1): input (2)(5): ground (3)(4): no connect (6): output 0.70.3 input electrode marker standard type part number center frequency (fo) (mhz) nominal center frequency (fn) (mhz) 3db bandwidth (khz) attenuation (khz) insertion loss (db) ripple (db) spurious attenuation (1) (db) spurious attenuation (2) (db) input/output impedance (ohm) sfecf10m7ha00-r0 10.700 ?0khz - 180 ?0khz 470 max. 4.0?.0db 1.0 max. 30 min. [within 9mhz to fo] 30 min. [within fo to 12mhz] 330 sfecf10m7hf00-r0 - 10.700 fn?5 min. 510 max. 8.0max. [at fn] 1.0 max. 30 min. [within 9mhz to fn] 25 min. [within fn to 12mhz] 330 sfecf10m7ga00-r0 10.700 ?0khz - 230 ?0khz 510 max. 3.5?.0db 1.0 max. 30 min. [within 9mhz to fo] 30 min. [within fo to 12mhz] 330 sfecf10m7gf00-r0 - 10.700 fn?5 min. 560 max. 8.0max. [at fn] 1.0 max. 30 min. [within 9mhz to fn] 25 min. [within fn to 12mhz] 330 sfecf10m7fa00-r0 10.700 ?0khz - 280 ?0khz 590 max. 3.0?.0db 1.0 max. 30 min. [within 9mhz to fo] 30 min. [within fo to 12mhz] 330 sfecf10m7ff00-r0 - 10.700 fn?5 min. 620 max. 7.0max. [at fn] 1.0 max. 30 min. [within 9mhz to fn] 25 min. [within fn to 12mhz] 330 sfecf10m7ea00-r0 10.700 ?0khz - 330 ?0khz 700 max. 3.0?.0db 1.0 max. 30 min. [within 9mhz to fo] 30 min. [within fo to 12mhz] 330 sfecf10m7da0001-r0 10.700 ?0khz - 420 min. 950 max. 3.0?.0db 3.0 max. 35 min. [within 9mhz to fo] 25 min. [within fo to 12mhz] 330 sfecf10m7df00-r0 - 10.700 fn?50 min. 990 max. 6.0max. [at fn] 3.0 max. 20 min. [within 9mhz to fn] 20 min. [within fn to 12mhz] 330 area of attenuation: [within 20db] area of insertion loss: at minimum loss point area of ripple: within 3db b.w. center frequency (fo) de ned by center of 3db bandwidth. for safety purposes, connect the output of lters to the if ampli er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. p05e.pdf nov.24,2011 21 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. this catalog has only typical speci cations because there is no space for detailed speci cations. therefore, please review our product speci cations or consult the approval sheet for product speci cations before ordering. 7 high-reliability type part number center frequency (fo) (mhz) nominal center frequency (fn) (mhz) 3db bandwidth (khz) attenuation (khz) insertion loss (db) ripple (db) spurious attenuation (1) (db) spurious attenuation (2) (db) input/output impedance (ohm) sfecf10m7ha00s0-r0 10.700 ?0khz - 180 ?0khz 470 max. 4.0?.0db 1.0 max. 30 min. [within 9mhz to fo] 30 min. [within fo to 12mhz] 330 sfecf10m7hf00s0-r0 - 10.700 fn?5 min. 510 max. 8.0max. [at fn] 1.0 max. 30 min. [within 9mhz to fn] 25 min. [within fn to 12mhz] 330 sfecf10m7ga00s0-r0 10.700 ?0khz - 230 ?0khz 510 max. 3.5?.0db 1.0 max. 30 min. [within 9mhz to fo] 30 min. [within fo to 12mhz] 330 sfecf10m7gf00s0-r0 - 10.700 fn?5 min. 560 max. 8.0max. [at fn] 1.0 max. 30 min. [within 9mhz to fn] 25 min. [within fn to 12mhz] 330 sfecf10m7fa00s0-r0 10.700 ?0khz - 280 ?0khz 590 max. 3.0?.0db 1.0 max. 30 min. [within 9mhz to fo] 30 min. [within fo to 12mhz] 330 sfecf10m7ff00s0-r0 - 10.700 fn?5 min. 630 max. 7.0max. [at fn] 1.0 max. 30 min. [within 9mhz to fn] 25 min. [within fn to 12mhz] 330 sfecf10m7ea00s0-r0 10.700 ?0khz - 330 ?0khz 700 max. 3.0?.0db 1.0 max. 30 min. [within 9mhz to fo] 30 min. [within fo to 12mhz] 330 sfecf10m7df00s0-r0 - 10.700 fn?45 min. 990 max. 6.0max. [at fn] 3.0 max. 20 min. [within 9mhz to fn] 20 min. [within fn to 12mhz] 330 area of attenuation: [within 20db] area of insertion loss: at minimum loss point area of ripple: within 3db b.w. center frequency (fo) de ned by center of 3db bandwidth. for safety purposes, connect the output of lters to the if ampli er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. (1) (2) (3) (6) (5) (4) r 2 c 2 e 2 rf voltmeter r 1 e 1 s.s.g. rg rg = 50 r 1 = 280 5% r 2 = 330 5% c 2 = 10 2 pf (including stray capacitance and input capacitance of rf volt meter) e 1 : s.s.g. output voltage : input : ground : no connect : output (1) (2)(5) (3)(4) (6) c test circuit 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 frequency (mhz) attenuation (db) 10.300 10.500 10.700 10.900 11.100 g.d.t. (sec.) 7 6 5 4 3 2 1 0 c frequency characteristics sfecf10m7fa00-r0 frequency (mhz) attenuation (db) 8.700 9.700 10.700 11.700 12.700 0 10 20 30 40 50 60 70 sfecf10m7fa00-r0 p05e.pdf nov.24,2011 22 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. this catalog has only typical speci cations because there is no space for detailed speci cations. therefore, please review our product speci cations or consult the approval sheet for product speci cations before ordering. 7 ceramic filters (cerafil r ) for communications equipment cerafil r mhz smd type sfsce10m7 series sfsce series are chip surface mount lters available for 3db bandwidth at 700khz to 1.3mhz. (more than twice width compared with current types) they have 1.0mm max. thickness and small mounting area (4.5x3.8mm). c features 1. the lters are mountable by automatic placers. 2. they are slim, at only 1.0mm max. thickness, and have a small mounting area (4.5x3.8mm) enabling exible pcb design. 3. available lead (pb) free solder re ow. 4. operating temperature range: -20 to +80 (?) storage temperature range: -40 to +85 (?) c applications 1. ss digital communication system 2. digital wireless audio 3. phs evolution system 4. rfid reader writer 5. rke (3.5) (in mm) * 0.4 3.8 (1.8) 4.5 (1) (2) (4) (3) (4.0) 1.0 max. 0.85 0.15 0.3 (1) (2) (3) (4) tolerance unless otherwise specified: 0.1 ( ) : input : output : no connect : ground : eiaj monthly code : reference * (2.25) 1.1 0.6 0.15 (4-r0.3) (0.3) (1) (4) (2) (3) part number nominal center frequency (fn) (mhz) 3db bandwidth (khz) stop bandwidth (mhz) insertion loss (db) ripple (db) spurious response (db) gdt deviation (s) input/output impedance (ohm) sfsce10m7wf03-r0 10.700 fn?00.0 min. 2.2 max. (total) [within 20db] 6.0 max. [at minimum loss point] 2.0 max. [within 3db bandwidth] 30/25 min. [within 5.7mhz to fn / fn to 15.7mhz] 0.6 max. [within fn?00khz] 470 sfsce10m7wf04-r0 10.700 fn?00.0 min. 1.8 max. (total) [within 20db] 6.0 max. [at minimum loss point] 1.5 max. [within 3db bandwidth] 35/25 min. [within 5.7mhz to fn / fn to 15.7mhz] 0.6 max. [within fn?25khz] 470 sfsce10m7wf05-r0 10.700 fn?25.0 min. 1.7 max. (total) [within 20db] 6.0 max. [at minimum loss point] 1.5 max. [within 3db bandwidth] 40/30 min. [within 5.7mhz to fn / fn to 15.7mhz] 0.6 max. [within fn?50khz] 470 for safety purposes, connect the output of lters to the if ampli er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. r1+rg=r2=input/output impedance, rg=50 c2=10pf (including stray capacitance and input capacitance of rf voltmeter) e1: s.s.g. output voltage (1): input (2): output (3): no connect (4): ground rf voltmeter c2 r2 r1 rg s.s.g. (4) (1) (3) (2) c test circuit p05e.pdf nov.24,2011 23 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. this catalog has only typical speci cations because there is no space for detailed speci cations. therefore, please review our product speci cations or consult the approval sheet for product speci cations before ordering. 8 2.0 1.6 1.2 0.8 0.4 0.0 frequency (mhz) attenuation (db) g.d.t. (sec.) 11.100 10.300 9.500 11.900 11.500 10.700 9.900 0 2 4 6 8 10 c frequency characteristics sfsce10m7wf03-r0 frequency (mhz) 6.700 8.700 10.700 12.700 14.700 attenuation (db) 0 20 40 60 80 sfsce10m7wf03-r0 p05e.pdf nov.24,2011 24 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 8 mhz smd type cerafil r notice continued on the following page. filter is soldered twice within the following temperature conditions. 1. standard reflow soldering conditions (1) reflow filter is soldered at +3505c for 3.00.5 seconds. the soldering iron should not touch the filter while soldering. (2) soldering iron the component is recommended with placement machines that employ optical placement capabilities. the component might be damaged by excessive mechanical force. please make sure that you have evaluated by using placement machines before going into mass production. do not use placement machines that utilize mechanical positioning. please contact murata for details beforehand. (3) condition for placement machines (a) the component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) design layout of components on the pc board to minimize the stress imposed on the warp or flexure of the board. (c) after installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. to prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) when the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. careful checking and maintenance are necessary to prevent unexpected trouble. (e) when correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. depending on the soldering conditions, the effective area of terminations may be reduced. solder containing ag should be used to prevent the electrode erosion. (f) do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (4) other o soldering and mounting temperature (c) 100 230 260 30 sec. min. 40 sec. max. peak (260c max.) pre-heating (150-180c) heating (230c) gradual cooling 120 sec. min. 60-120 sec. [component direction] [component layout close to board] place the component lateral to the direction in which stress acts. susceptibility to stress is in the order of : a>c>b b a c slit perforation c sfecf10m7 series notice p05e.pdf nov.24,2011 25 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. mhz smd type cerafil r notice o storage and operating conditions o rating the component may be damaged if excessive mechanical stress is applied. o handling 1. accurate test circuit values are required to measure electrical characteristics. miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. the components, packed in a moisture proof bag (dry pack), are sensitive to moisture. the following treatment is required before applying reflow soldering, to avoid reliability degradation caused by thermal stress. when unpacked, store the component in an atmosphere of reflow 30c and below 60%r.h., and solder within 1 week. 3. for safety purposes, connect the output of filters to the if amplifier through a d.c. blocking capacitor. avoid applying a direct current to the output of ceramic filters. 1. product storage condition please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. please store the products under the following conditions: temperature: -10 to +40c humidity: 15 to 85% r.h. 2. expiration date on storage expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. please use the products within six months after delivery. if you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. please confirm solderability and characteristics for the products regularly. 3. notice on product storage (1) please do not store the products in a chemical atmosphere (acids, alkali, bases, organic gas, sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) please do not drop the products to avoid cracking of ceramic element. 4. other please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. continued from the preceding page. do not clean or wash the component as it is not hermetically sealed. 2. wash in case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. coating p05e.pdf nov.24,2011 26 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. mhz smd type cerafil r notice continued on the following page. filter is soldered twice within the following temperature conditions. 1. standard reflow soldering conditions (1) reflow filter is soldered at +2805c for 3.00.5 seconds. the soldering iron should not touch the filter while soldering. (2) soldering iron the component is recommended with placement machines that employ optical placement capabilities. the component might be damaged by excessive mechanical force. please make sure that you have evaluated by using placement machines before going into mass production. do not use placement machines that utilize mechanical positioning. please contact murata for details beforehand. (3) condition for placement machines (a) the component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) design layout of components on the pc board to minimize the stress imposed on the warp or flexure of the board. (c) after installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. to prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) when the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. careful checking and maintenance are necessary to prevent unexpected trouble. (e) when correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. (f) do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (4) other o soldering and mounting peak (240c max.) heating (230c) gradual cooling pre-heating (150-180c) 100 230 240 temperature (c) 60-120 sec. 30 sec. max. 30 sec. min. 120 sec. min. [component direction] place the compon- ent laterally to the direction in which stress acts. [component layout close to board] susceptibility to stress is in the order of : a>c>b b a c slit perforation c sfsce10m7wf03-r0 notice p05e.pdf nov.24,2011 27 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. mhz smd type cerafil r notice o handling 1. accurate test circuit values are required to measure electrical characteristics. miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. for safety purposes, connect the output of filters to the if amplifier through a d.c. blocking capacitor. avoid applying a direct current to the output of ceramic filters. continued from the preceding page. do not clean or wash the component as it is not hermetically sealed. 2. wash in case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. coating o storage and operating conditions 1. product storage condition please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. please store the products under the following conditions: temperature: -10 to + 40c humidity: 15 to 85% r.h. 2. expiration date on storage expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. please use the products within six months after delivery. if you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. please confirm solderability and characteristics for the products regularly. 3. notice on product storage (1) please do not store the products in a chemical atmosphere (acids, alkali, bases, organic gas, sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) please do not drop the products to avoid cracking of ceramic element. 4. other please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. o rating the component may be damaged if excessive mechanical stress is applied. p05e.pdf nov.24,2011 28 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. mhz smd type cerafil r notice continued on the following page. filter is soldered twice within the following temperature conditions. 1. standard reflow soldering conditions (1) reflow filter is soldered at +2805c for 3.00.5 seconds. the soldering iron should not touch the filter while soldering. (2) soldering iron the component is recommended with placement machines that employ optical placement capabilities. the component might be damaged by excessive mechanical force. please make sure that you have evaluated by using placement machines before going into mass production. do not use placement machines that utilize mechanical positioning. please contact murata for details beforehand. (3) condition for placement machines (a) the component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) design layout of components on the pc board to minimize the stress imposed on the warp or flexure of the board. (c) after installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. to prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) when the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. careful checking and maintenance are necessary to prevent unexpected trouble. (e) when correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. (f) do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (4) other o soldering and mounting [component direction] place the compon- ent laterally to the direction in which stress acts. [component layout close to board] susceptibility to stress is in the order of : a>c>b b a c slit perforation peak (260c max.) heating (230c) gradual cooling pre-heating (150-180c) 100 230 260 temperature (c) 60-120 sec. 40 sec. max. 30 sec. min. 120 sec. min. c sfsce10m7wf04/05-r0 notice p05e.pdf nov.24,2011 29 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. mhz smd type cerafil r notice o handling 1. accurate test circuit values are required to measure electrical characteristics. miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. for safety purposes, connect the output of filters to the if amplifier through a d.c. blocking capacitor. avoid applying a direct current to the output of ceramic filters. continued from the preceding page. do not clean or wash the component as it is not hermetically sealed. 2. wash in case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. coating o storage and operating conditions 1. product storage condition please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. please store the products under the following conditions: temperature: -10 to + 40c humidity: 15 to 85% r.h. 2. expiration date on storage expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. please use the products within six months after delivery. if you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. please confirm solderability and characteristics for the products regularly. 3. notice on product storage (1) please do not store the products in a chemical atmosphere (acids, alkali, bases, organic gas, sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) please do not drop the products to avoid cracking of ceramic element. 4. other please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. o rating the component may be damaged if excessive mechanical stress is applied. p05e.pdf nov.24,2011 30 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. smd type cerafil r standard land pattern dimensions (in mm) 2.0 2.475 6.95 1.6 1.55 7.45 0.8 0.9 0.925 2.0 2.0 1.1 c sfpka series (in mm) 1.2 0.7 0.7 1.4 1.2 2.0 3.5 2.0 c cfukg/cfukf series (in mm) 1.2 3.0 3.0 5.5 4-r3.0 11.5 7.5 6.5 1.6 2.1 1.8 0.5 c cfwka series input ground no connect output (1): (2)(5): (3)(4): (6): (in mm) it shows solder resist land pattern. 1.05 1.40 1.05 0.1 0.1 0.1 0.1 0.8 0.6 0.8 0.6 0.8 0.1 0.1 0.3 0.3 0.3 (6) (5) (4) (1) (2) (3) c sfecf10m7 series (in mm) it shows solder resist land pattern. (1): input (2): output (3): no connect (4): ground 0.5 0.5 1.4 0.1 0.1 0.1 1.05 (3) (4) (2) (1) 0.81.15 1.3 c sfsce10m series p05e.pdf nov.24,2011 31 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. khz smd type cerafil r packaging part number ?180mm 450 450 350 ?330mm 1,000 sfpka cfukg cfukf cfwka c minimum quantity dimensions of carrier tape user direction of feed 12.00.1 16.00.2 8.80.1 7.50.1 1.750.1 4.00.1 2.00.1 5.30.1 ?1.5 7.40.1 +0.1 -0 cover film (in mm) dimensions of reel label ?13.00.2 2.20.5 21.51.0 3302 801 240 to 280 400 to 560 160 to 190 17.50.5 empty components cover film empty trailer leader s 0 a r t n u m b e r m a r k e d s i d e i s a l w a y s f a c i n g u p c sfpka series +1.0 -0 +0 -3.0 dimensions of carrier tape dimensions of reel (in mm) leader cover film empty empty components trailer 160 to 190 160 to 200 400 to 560 (?60 ) (?180 ) 17.01.0 19.40.3 ?13.00.5 2.00.2 s 0 a r t n u m b e r m a r k e d s i d e i s a l w a y s f a c i n g u p 5 s e r d i r e c t i o n o f f e e d cover film +0.1 -0.0 4.00.1 7.50.1 1.750.1 6.760.1 16.00.2 8.10.1 4.20.1 7.70.1 8.00.1 6.70.1 6.30.1 2.00.1 ?1.5 c cfukg/cfukf series continued on the following page. p05e.pdf nov.24,2011 32 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. khz smd type cerafil r packaging continued from the preceding page. dimensions of carrier tape dimensions of reel (in mm) user direction of feed +0.1 -0.0 4.00.1 11.50.1 1.750.1 24.00.3 12.40.1 3.20.1 0.40.1 12.00.1 12.00.1 2.00.1 ?1.5 cover film 8.10.1 7.70.1 (?62.01.0) (?1782.0) 25.51.0 29.91.0 leader cover film empty empty components trailer 160 to 190 240 to 280 400 to 560 ?13.00.5 2.00.2 s 0 a r t n u m b e r m a r k e d s i d e i s a l w a y s f a c i n g u p c cfwka series p05e.pdf nov.24,2011 33 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. mhz smd type cerafil r packaging part number ?180mm 2,000 1,500 sfecf sfsce c minimum quantity ( ): reference (in mm) dimensions of carrier tape dimensions of reel ?13.00.5 2.00.5 240 to 280 400 to 560 160 to 190 empty components cover film empty trailer leader 17.01.0 +1.0 -0 13.0 +0 -1.5 180 +1.0 -0 60 chip filter ?1.550.05 user direction of feed cover film peeling strength (0.1 to 0.7n) 0.30.05 1.840.1 (0.05) (3) 10 max. 5.50.05 4.10.1 1.750.1 3 max. 4.10.1 4.00.1 2.00.05 4.00.1 3.35 12.00.2 +0.1 -0.05 s 0 a r t n u m b e r m a r k e d s i d e i s a l w a y s f a c i n g u p c sfecf10m7 series (in mm) dimensions of carrier tape dimensions of reel s 0 a r t . u m b e r m a r k e d s i d e i s a l w a y s f a c i n g u p (3) ? m a x ? ? 5 s e r d i r e c t i o n o f f e e d ? m a x cover film 0 e e l i n g s t r e n g t h t o . ? t o t o t o % m p t y # o m p o n e n t s cover film % m p t y trailer , e a d e r c sfsce10m7 series p05e.pdf nov.24,2011 34 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. ceramic filters (cerafil r ) for communications equipment cerafil r plastic case general use cfula series cfula series are high selectivity ceramic ? lters, which consist of 4 ceramic elements connected in a ladder form. they are most suitable for digital communications and cellular phones because of their improved gdt characteristics. c features 1. high selectivity 2. a variety of bandwidths available 3. excellent gdt characteristics are available within pass bandwidth. 4. easily mounted on a printed circuit board 5. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 3.00.3 7.00.3 4.20.3 7.30.3 0.80.1 0.60.1 1.20.5 8.00.3 marking eiaj code 3.30.5 2.70.3 (1)(2) (3) 0.30.1 1.5 max. 0.150.05 connection (1): input (2): ground (3): output (in mm) part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) input/output impedance (ohm) cfula455kb2a-b0 455 2.0khz fn15.0 min. fn30.0 max. [within 40db] 27 min. [within fn100khz] 4.0 max. [at minimum loss point] 1500 cfula455kc2a-b0 455 2.0khz fn12.5 min. fn24.0 max. [within 40db] 27 min. [within fn100khz] 4.0 max. [at minimum loss point] 1500 cfula455kd4a-b0 455 1.5khz fn10.0 min. fn20.0 max. [within 40db] 27 min. [within fn100khz] 4.0 max. [at minimum loss point] 1500 cfula455ke4a-b0 455 1.5khz fn7.5 min. fn15.0 max. [within 40db] 27 min. [within fn100khz] 6.0 max. [at minimum loss point] 1500 cfula455kf4a-b0 455 1.5khz fn6.0 min. fn12.5 max. [within 40db] 27 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 cfula455kg1a-b0 455 1.0khz fn4.5 min. fn10.0 max. [within 40db] 25 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 cfula455kh1a-b0 455 1.0khz fn3.0 min. fn9.0 max. [within 40db] 35 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 center frequency (fo) de? ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 r1 rg s.s.g. 0dbm r2 e2 rf voltmeter connection (1): input (2): ground (3): output (1) (2) (3) rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 35 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 9 100 40 30 20 10 0 attenuation (db) 0 50 100 150 200 g.d.t. (sec.) 430 455 480 frequency (khz) 90 80 70 60 50 c frequency characteristics cfula455ke4a-b0 100 40 30 20 10 0 attenuation (db) 200 frequency (khz) 90 80 70 60 50 300 400 500 600 700 800 900 1000 cfula455ke4a-b0 p05e.pdf nov.24,2011 36 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 9 ceramic filters (cerafil r ) for communications equipment cerafil r plastic case general use cfwla series ceramic ? lter cfwla series are low pro? le high selectivity ceramic ? lters, which use 6 elements in ladder form. they are best suitable to high-class transceivers, cordless telephones and amateur radios. c features 1. low pro? le, high selectivity 2. available bandwidths are b to j as standard 3. easily mountable on any pc board 4. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 4.30.3 0.15 1.5 max. 2.30.5 2.00.3 2.90.3 11.00.5 marking eiaj code 1.20.5 (1)(2) (4) (3) (5) 1.350.5 7.00.5 3.50.5 0.60.1 0.80.1 7.50.5 2.60.3 connection (1): input (2)(3)(4): ground (5): output (in mm) 2.90.3 2.90.3 part number nominal center frequency (fn) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) ripple (db) input/output impedance (ohm) cfwla455kbfa-b0 455.0 fn15.0 min. fn30.0 max. [within 50db] 35 min. [within fn100khz] 4.0 max. [at minimum loss point] 3.0 max. [within fn10khz] 1500 cfwla455kcfa-b0 455.0 fn12.5 min. fn24.0 max. [within 50db] 35 min. [within fn100khz] 4.0 max. [at minimum loss point] 3.0 max. [within fn8khz] 1500 cfwla455kdfa-b0 455.0 fn10.0 min. fn20.0 max. [within 50db] 35 min. [within fn100khz] 4.0 max. [at minimum loss point] 3.0 max. [within fn7khz] 1500 cfwla455kefa-b0 455.0 fn7.5 min. fn15.0 max. [within 50db] 35 min. [within fn100khz] 6.0 max. [at minimum loss point] 3.0 max. [within fn5khz] 1500 cfwla455kffa-b0 455.0 fn6.0 min. fn12.5 max. [within 50db] 35 min. [within fn100khz] 6.0 max. [at minimum loss point] 3.0 max. [within fn4khz] 2000 cfwla455kgfa-b0 455.0 fn4.5 min. fn10.0 max. [within 50db] 35 min. [within fn100khz] 6.0 max. [at minimum loss point] 2.0 max. [within fn3khz] 2000 cfwla455khfa-b0 455.0 fn3.0 min. fn9.0 max. [within 50db] 60 min. [within fn100khz] 6.0 max. [at minimum loss point] 2.0 max. [within fn2khz] 2000 cfwla455kjfa-b0 455.0 fn2.0 min. fn7.5 max. [within 50db] 60 min. [within fn100khz] 7.0 max. [at minimum loss point] 2.0 max. [within fn1.5khz] 2000 for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 r1 r2 e2 rf voltmeter connection (1): input (5): output (2)(3)(4): ground rg s.s.g. 0dbm (1) (2) (3) (4) (5) rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 37 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 10 100 40 30 20 10 0 attenuation (db) 0 100 200 300 400 g.d.t. (sec.) 430 455 480 frequency (khz) 90 80 70 60 50 c frequency characteristics cfwla455kefa-b0 100 40 30 20 10 0 attenuation (db) 200 frequency (khz) 90 80 70 60 50 300 400 500 600 700 800 900 1000 cfwla455kefa-b0 p05e.pdf nov.24,2011 38 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 10 ceramic filters (cerafil r ) for communications equipment cerafil r plastic case miniaturized type cfulb series cfulb series ceramic ? lters are miniature, high- performance ceramic ? lters composed of piezoelectric elements connected in a ladder form. these ? lters, only 6.3mm high, are 65% the volume of conventional types. they are well suited for miniaturizing various kinds of communications equipment, pocket pagers, car radios, cordless telephones and mobile telephones. c features 1. miniature and high selectivity 2. a variety of bandwidths are available 3. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 4.30.3 1.0 max. 1.80.3 2.40.3 6.50.3 0.80.3 1.0 0.3 6.30.3 6.50.3 0.50.1 0.70.1 3.50.3 0.70.3 (1) (2) (3) (4) 0.150.05 connection (1): input (2): output (3) : ground (4) (in mm) } marking eiaj code part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) input/output impedance (ohm) cfulb455kb2a-b0 455 2.0khz fn15.0 min. fn30.0 max. [within 40db] 27 min. [within fn100khz] 4.0 max. [at minimum loss point] 1500 cfulb455kc2a-b0 455 2.0khz fn12.5 min. fn24.0 max. [within 40db] 27 min. [within fn100khz] 4.0 max. [at minimum loss point] 1500 cfulb455kd4a-b0 455 1.5khz fn10.0 min. fn20.0 max. [within 40db] 27 min. [within fn100khz] 4.0 max. [at minimum loss point] 1500 cfulb455ke4a-b0 455 1.5khz fn7.5 min. fn15.0 max. [within 40db] 27 min. [within fn100khz] 6.0 max. [at minimum loss point] 1500 cfulb455kf4a-b0 455 1.5khz fn6.0 min. fn12.5 max. [within 40db] 27 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 cfulb455kg1a-b0 455 1.0khz fn4.5 min. fn10.0 max. [within 40db] 25 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 cfulb455kh1a-b0 455 1.0khz fn3.0 min. fn9.0 max. [within 40db] 35 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 cfulb455kj1a-b0 455 1.0khz fn2.0 min. fn7.5 max. [within 40db] 35 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 center frequency (fo) de? ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. cfulb455k_series ? lters are 4-element ceramic ? lters and miniature versions of cfula455k_series. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 r1 rg s.s.g. 0dbm r2 e2 rf voltmeter connection (1) (2) (3)(4) : input : output : ground (1) (2) (3) (4) rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 39 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 11 100 40 30 20 10 0 attenuation (db) 0 50 100 150 200 g.d.t. (sec.) 430 455 480 frequency (khz) 90 80 70 60 50 c frequency characteristics cfulb455ke4a-b0 100 40 30 20 10 0 attenuation (db) 200 frequency (khz) 90 80 70 60 50 300 400 500 600 700 800 900 1000 cfulb455ke4a-b0 p05e.pdf nov.24,2011 40 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 11 ceramic filters (cerafil r ) for communications equipment cerafil r plastic case miniaturized type cfwlb series cfwlb series ceramic ? lters are miniature, high- performance ceramic ? lters composed of piezoelectric elements connected in a ladder form. these ? lters, only 6.3mm high, are 67% the volume of conventional types. they are well suited for miniaturizing various kinds of communications equipment, pocket pagers, pagers, car radios, cordless telephones and mobile telephones. c features 1. miniature and high selectivity 2. a variety of bandwidths are available. 3. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 4.30.3 1.0 max. 2.70.3 2.50.3 9.50.3 0.70.3 1.00.3 6.30.3 6.50.3 0.50.1 0.70.1 3.50.3 0.90.3 0.150.05 (1) (3) (4) (2) (5) 2.80.3 connection (1): input (2): output (3) (4) : ground (5) (in mm) } marking eiaj code part number nominal center frequency (fn) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) input/output impedance (ohm) cfwlb455kbfa-b0 455.0 fn15.0 min. fn30.0 max. [within 50db] 35 min. [within fn100khz] 4.0 max. [at minimum loss point] 1500 cfwlb455kcfa-b0 455.0 fn12.5 min. fn24.0 max. [within 50db] 35 min. [within fn100khz] 4.0 max. [at minimum loss point] 1500 cfwlb455kdfa-b0 455.0 fn10.0 min. fn20.0 max. [within 50db] 35 min. [within fn100khz] 4.0 max. [at minimum loss point] 1500 cfwlb455kefa-b0 455.0 fn7.5 min. fn15.0 max. [within 50db] 35 min. [within fn100khz] 6.0 max. [at minimum loss point] 1500 cfwlb455kefa004-b0 455.0 fn7.5 min. fn15.0 max. [within 60db] 60 min. [within fn15khz to 30khz] 5.0 max. [at fn] 1500 cfwlb455kffa-b0 455.0 fn6.0 min. fn12.5 max. [within 50db] 35 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 cfwlb455kgfa-b0 455.0 fn4.5 min. fn10.0 max. [within 50db] 35 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 cfwlb455khfa-b0 455.0 fn3.0 min. fn9.0 max. [within 50db] 55 min. [within fn100khz] 6.0 max. [at minimum loss point] 2000 cfwlb455kjfa-b0 455.0 fn2.0 min. fn7.0 max. [within 50db] 55 min. [within fn100khz] 7.0 max. [at minimum loss point] 2000 cfwlb455k_series ? lters are 4-element ceramic ? lters and miniature versions of cfwla455k_series. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. p05e.pdf nov.24,2011 41 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 12 (1) (2) (3) (4) (5) r1 r2 e2 e1 rg s.s.g. 0dbm rf voltmeter connection (1) (2) (3)(4)(5) : input : output : ground rg+r1=r2=input/output impedance c test circuit 100 40 30 20 10 0 attenuation (db) 0 50 100 200 g.d.t. (sec.) 430 455 480 frequency (khz) 90 80 70 60 50 150 c frequency characteristics cfwlb455kefa-b0 100 40 30 20 10 0 attenuation (db) 200 frequency (khz) 90 80 70 60 50 300 400 500 600 700 800 900 1000 cfwlb455kefa-b0 p05e.pdf nov.24,2011 42 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 12 ceramic filters (cerafil r ) for communications equipment cerafil r plastic case group delay flat type cfula_y series cfula_y series are high selectivity ceramic ? lters, which consist of 4 ceramic elements connected in a ladder form. they are most suitable for digital communications and cellular phones because of their improved gdt characteristics. c features 1. high selectivity 2. a variety of bandwidths are available. 3. excellent gdt characteristics are available within pass bandwidth. 4. easily mounted on a printed circuit board 5. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 3.00.3 7.00.3 4.20.3 7.30.3 0.80.1 0.60.1 1.20.5 8.00.3 marking eiaj code 3.30.5 2.70.3 (1)(2) (3) 0.30.1 1.5 max. 0.150.05 connection (1): input (2): ground (3): output (in mm) part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) gdt deviation (s) input/output impedance (ohm) cfula455kb4y-b0 455 1.5khz fn15.0 min. fn35.0 max. [within 40db] 25 min. [within fn100khz] 5.0 max. [at minimum loss point] 15.0 max. [within fn10khz] 1500 cfula455kc4y-b0 455 1.5khz fn12.5 min. fn30.0 max. [within 40db] 25 min. [within fn100khz] 6.0 max. [at minimum loss point] 15.0 max. [within fn8khz] 1500 cfula455kd1y-b0 455 1.0khz fn10.0 min. fn25.0 max. [within 40db] 23 min. [within fn100khz] 7.0 max. [at minimum loss point] 20.0 max. [within fn7khz] 1500 cfula455ke1y-b0 455 1.0khz fn7.5 min. fn20.0 max. [within 40db] 23 min. [within fn100khz] 8.0 max. [at minimum loss point] 20.0 max. [within fn5khz] 1500 cfula455kf1y-b0 455 1.0khz fn6.0 min. fn17.5 max. [within 40db] 23 min. [within fn100khz] 9.0 max. [at minimum loss point] 20.0 max. [within fn4khz] 2000 cfula455kg1y-b0 455 1.0khz fn4.5 min. fn15.0 max. [within 40db] 23 min. [within fn100khz] 10.0 max. [at minimum loss point] 20.0 max. [within fn3khz] 2000 center frequency (fo) de? ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 r1 rg s.s.g. 0dbm r2 e2 rf voltmeter connection (1): input (2): ground (3): output (1) (2) (3) rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 43 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 13 attenuation (db) frequency (khz) group delay time (sec) 430 455 480 10 20 30 40 50 60 70 80 90 100 200 150 100 50 0 0 c frequency characteristics cfula455ke1y-b0 200 300 400 500 600 700 800 900 1000 10 20 30 40 50 60 70 80 90 attenuation (db) frequency (khz) 0 100 cfula455ke1y-b0 p05e.pdf nov.24,2011 44 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 13 ceramic filters (cerafil r ) for communications equipment cerafil r plastic case group delay flat type cfwla_y series cfwla_y series are high selectivity ceramic ? lters, which consist of 6 ceramic elements connected in a ladder form. they are most suitable for digital communications and mobile telephones because of their improved gdt characteristics. c features 1. high selectivity 2. a variety of bandwidths are available 3. excellent gdt characteristics are available within pass bandwidth. 4. easily mounted on a printed circuit board 5. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 4.30.3 0.15 1.5 max. 2.30.5 2.00.3 2.90.3 11.00.5 marking eiaj code 1.20.5 (1)(2) (4) (3) (5) 1.350.5 7.00.5 3.50.5 0.60.1 0.80.1 7.50.5 2.60.3 connection (1): input (2)(3)(4): ground (5): output (in mm) 2.90.3 2.90.3 part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) gdt deviation (s) input/output impedance (ohm) cfwla455kb4y-b0 455 1.5khz fn15.0 min. fn30.0 max. [within 50db] 40 min. [within fn100khz] 6.0 max. [at minimum loss point] 30.0 max. [within fn10khz] 1500 cfwla455kc4y-b0 455 1.5khz fn12.5 min. fn27.5 max. [within 50db] 40 min. [within fn100khz] 7.0 max. [at minimum loss point] 30.0 max. [within fn8khz] 1500 cfwla455kd1y-b0 455 1.0khz fn10.0 min. fn25.0 max. [within 50db] 40 min. [within fn100khz] 8.0 max. [at minimum loss point] 30.0 max. [within fn7khz] 1500 cfwla455ke1y-b0 455 1.0khz fn7.5 min. fn20.0 max. [within 50db] 40 min. [within fn100khz] 9.0 max. [at minimum loss point] 30.0 max. [within fn5khz] 1500 cfwla455kf1y-b0 455 1.0khz fn6.0 min. fn17.5 max. [within 50db] 40 min. [within fn100khz] 10.0 max. [at minimum loss point] 40.0 max. [within fn4khz] 2000 cfwla455kg1y-b0 455 1.0khz fn4.5 min. fn15.0 max. [within 50db] 40 min. [within fn100khz] 11.0 max. [at minimum loss point] 40.0 max. [within fn3khz] 2000 center frequency (fo) de? ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 r1 r2 e2 rf voltmeter connection (1): input (5): output (2)(3)(4): ground rg s.s.g. 0dbm (1) (2) (3) (4) (5) rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 45 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 14 attenuation (db) 430 455 480 frequency (khz) 10 20 30 40 50 60 70 80 90 100 400 300 200 100 0 group delay time (sec) 0 c frequency characteristics cfwla455ke1y-b0 200 300 400 500 600 700 800 900 1000 10 20 30 40 50 60 70 80 90 attenuation (db) frequency (khz) 0 100 cfwla455ke1y-b0 p05e.pdf nov.24,2011 46 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 14 ceramic filters (cerafil r ) for communications equipment cerafil r plastic case group delay flat type miniaturized type cfulb_y series ceramic ? lter cfulb_y series are miniature and high- performance ? lters. these ? lters, only 6.3mm high, are 65% the volume of conventional types. well suited for miniaturizing communications equipment, especially for a cellular phone. c features 1. miniature, ? at gdt characteristics 2. suitable for a cellular phone 3. a variety of bandwidths are available. 4. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 4.30.3 1.0 max. 1.80.3 2.40.3 6.50.3 0.80.3 1.0 0.3 6.30.3 6.50.3 0.50.1 0.70.1 3.50.3 0.70.3 (1) (2) (3) (4) 0.150.05 connection (1): input (2): output (3) : ground (4) (in mm) } marking eiaj code part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) gdt deviation (s) input/output impedance (ohm) cfulb455kb4y-b0 455 1.5khz fn15.0 min. fn35.0 max. [within 40db] 25 min. [within fn100khz] 5.0 max. [at minimum loss point] 15.0 max. [within fn10khz] 1500 cfulb455kc4y-b0 455 1.5khz fn12.5 min. fn30.0 max. [within 40db] 25 min. [within fn100khz] 6.0 max. [at minimum loss point] 15.0 max. [within fn8khz] 1500 cfulb455kd1y-b0 455 1.0khz fn10.0 min. fn25.0 max. [within 40db] 23 min. [within fn100khz] 7.0 max. [at minimum loss point] 20.0 max. [within fn7khz] 1500 cfulb455ke1y-b0 455 1.0khz fn7.5 min. fn20.0 max. [within 40db] 23 min. [within fn100khz] 8.0 max. [at minimum loss point] 20.0 max. [within fn5khz] 1500 cfulb455kf1y-b0 455 1.0khz fn6.0 min. fn17.5 max. [within 40db] 23 min. [within fn100khz] 9.0 max. [at minimum loss point] 20.0 max. [within fn4khz] 2000 cfulb455kg1y-b0 455 1.0khz fn4.5 min. fn15.0 max. [within 40db] 23 min. [within fn100khz] 10.0 max. [at minimum loss point] 20.0 max. [within fn3khz] 2000 center frequency (fo) de? ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. cfulb455k_y series ? lters are 4-element ceramic ? lters and miniature versions of cfula455k_y series. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. e1 r1 rg s.s.g. 0dbm r2 e2 rf voltmeter connection (1) (2) (3)(4) : input : output : ground (1) (2) (3) (4) rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 47 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 15 attenuation (db) frequency (khz) group delay time (sec) 430 455 480 10 20 30 40 50 60 70 80 90 100 200 150 100 50 0 0 c frequency characteristics cfulb455ke1y-b0 200 300 400 500 600 700 800 900 1000 10 20 30 40 50 60 70 80 90 attenuation (db) frequency (khz) 0 100 cfulb455ke1y-b0 p05e.pdf nov.24,2011 48 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 15 ceramic filters (cerafil r ) for communications equipment cerafil r plastic case group delay flat type cfwlb_y series ceramic ? lter cfwlb_y series are miniature and high-performance ? lters. these ? lters, only 6.3mm high, are 67% the volume of conventional types. well suited for miniaturizing communications equipment, especially for a cellular phone. c features 1. miniature, ? at gdt characteristics 2. suitable for a cellular phone 3. a variety of bandwidths are available. 4. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) 4.30.3 1.0 max. 2.70.3 2.50.3 9.50.3 0.70.3 1.00.3 6.30.3 6.50.3 0.50.1 0.70.1 3.50.3 0.90.3 0.150.05 (1) (3) (4) (2) (5) 2.80.3 connection (1): input (2): output (3) (4) : ground (5) (in mm) } marking eiaj code part number center frequency (fo) (khz) 6db bandwidth (khz) stop bandwidth (khz) stop band attenuation (db) insertion loss (db) gdt deviation (s) input/output impedance (ohm) cfwlb455kb4y-b0 455 1.5khz fn15.0 min. fn30.0 max. [within 50db] 40 min. [within fn100khz] 6.0 max. [at minimum loss point] 30.0 max. [within fn10khz] 1500 cfwlb455kc4y-b0 455 1.5khz fn12.5 min. fn27.5 max. [within 50db] 40 min. [within fn100khz] 7.0 max. [at minimum loss point] 30.0 max. [within fn8khz] 1500 cfwlb455kd1y-b0 455 1.0khz fn10.0 min. fn25.0 max. [within 50db] 40 min. [within fn100khz] 8.0 max. [at minimum loss point] 30.0 max. [within fn7khz] 1500 cfwlb455ke1y-b0 455 1.0khz fn7.5 min. fn20.0 max. [within 50db] 40 min. [within fn100khz] 9.0 max. [at minimum loss point] 30.0 max. [within fn5khz] 1500 cfwlb455kf1y-b0 455 1.0khz fn6.0 min. fn17.5 max. [within 50db] 35 min. [within fn100khz] 10.0 max. [at minimum loss point] 40.0 max. [within fn4khz] 2000 cfwlb455kg1y-b0 455 1.0khz fn4.5 min. fn15.0 max. [within 50db] 40 min. [within fn100khz] 11.0 max. [at minimum loss point] 40.0 max. [within fn3khz] 2000 center frequency (fo) de? ned by the center of 6db bandwidth. (fn) means nominal center frequency 455khz. cfwlb455k_y series ? lters are 4-element ceramic ? lters and miniature versions of cfwla455k_y series. for safety purposes, connect the output of ? lters to the if ampli? er through a dc blocking capacitor. avoid applying a direct current to the output of ceramic ? lters. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. (1) (2) (3) (4) (5) r1 r2 e2 e1 rg s.s.g. 0dbm rf voltmeter connection (1) (2) (3)(4)(5) : input : output : ground rg+r1=r2=input/output impedance c test circuit p05e.pdf nov.24,2011 49 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 16 attenuation (db) 430 455 480 frequency (khz) 10 20 30 40 50 60 70 80 90 100 200 150 100 50 0 group delay time (sec) 0 c frequency characteristics cfwlb455ke1y-b0 200 300 400 500 600 700 800 900 1000 10 20 30 40 50 60 70 80 90 attenuation (db) frequency (khz) 0 100 cfwlb455ke1y-b0 p05e.pdf nov.24,2011 50 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 16 plastic case type cerafil r minimum quantity/notice part number bulk 200 250 150 150 cfula series cfulb series cfwla series cfwlb series (pcs.) the order quantity should be an integral multiple of the "minimum quantity" shown above. c minimum quantity o storage and operating conditions o rating the component may be damaged if excessive mechanical stress is applied. o soldering and mounting the component cannot withstand washing. o handling 1. do not use this product with bend. the component may be damaged if excessive mechanical stress is applied to it mounted on the printed circuit board. 2. all kinds of reflow soldering must not be applied on the component. 3. do not clean or wash the component as it is not hermetically sealed. 4. do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 5. conformal coating of the component is not acceptable due to non-sealed construction. 6. accurate test circuit values are required to measure electrical characteristics. miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 7. for safety purposes, connect the output of filters to the if amplifier through a d.c. blocking capacitor. avoid applying a direct current to the output of ceramic filters. 1. product storage condition please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. please store the products under the following conditions: temperature: -10 to +40c humidity: 15 to 85% r.h. 2. expiration date on storage expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. please use the products within six months after delivery. if you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. please confirm solderability and characteristics for the products regularly. 3. notice on product storage (1) please do not store the products in a chemical atmosphere (acids, alkali, bases, organic gas, sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) please do not drop the products to avoid cracking of ceramic element. 4. other please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. c notice p05e.pdf nov.24,2011 51 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. ceramic discriminators for communications equipment khz type ceramic discriminators ceramic discriminator consists of a wide band piezoelectric resonator. it is ideal for mobile communications equipment due to its small size and light weight. standard line includes products for a wide range of applications, from cordless telecom to cellular telephone. practically adjustment free at the detection circuit, small size is suitable for downsizing. c features 1. small in size and light weight 2. adjustment free at detection circuit 3. high sensitivity and stability 4. wide range of standard products are available for various ics. 5. operating temperature range: -20 to +80 (c) storage temperature range: -40 to +85 (c) marking eiaj code 6.60.3 1.50.3 6.00.2 1.150.2 1.00.1 3.70.2 3.1 max. 6.20.2 (in mm) cdbkb series (in mm) marking eiaj code 0.60.2 1.80.2 6.3 max. 4.20.2 6.00.2 0.50.1 0.150.05 0.90.2 3.00.3 6.0 max. 4.20.5 cdblb_cax series (in mm) marking eiaj code 1.50.3 1.00.3 0.50.2 6.3 max. 4.20.2 6.00.2 0.50.1 0.150.05 0.90.2 3.00.3 6.0 max. 4.20.5 cdblb_cay series speci ed by impedance characteristics (type 1) part number nominal center frequency (fn) (khz) inclination of impedance curve (1) inclination of impedance curve (2) capacitance (c) ic ic maker type cdblb455kcax02-b0 455 447.01.5khz (at |z|=2.05kohm) 463.01.5khz (at |z|=10.0kohm) 140pf20% ta8104f toshiba lead cdblb455kcax31-b0 455 447.01.5khz (at |z|=2.05kohm) 463.01.5khz (at |z|=10.0kohm) 140pf20% ta31141 toshiba lead for safety purposes, avoid applying a direct current between the terminals. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. p05e.pdf nov.24,2011 52 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 500k 180 50k 90 10k 5k 0 1k 500 C90 100 C180 impedance () phase (deg) 400 420 440 460 480 frequency (khz) 500 100k 50 c impedance curve cdblb455kcax02-b0 500k 180 50k 90 10k 5k 0 1k 500 C90 100 C180 impedance () phase (deg) 400 420 440 460 480 frequency (khz) 500 100k 50 cdblb455kcax31-b0 speci ed by impedance characteristics (type 2) part number nominal center frequency (fn) anti-resonant frequency (fa) delta f (fa-fr) resonant resistance (r) capacitance (c) ic ic maker type cdbkb455kcax33-r0 - 462.01.5khz 404.0khz 200ohm max. 150pf20% cxa1474 sony smd cdblb455kcay03-b0 - 455.01.5khz 465.0khz 70ohm max. 550pf20% cxa1184m sony lead cdblb455kcax15-b0 - 463.51.0khz 432.0khz 300ohm max. 140pf20% cxa1183m sony lead cdblb455kcax25-b0 - 465.01.5khz 454.0khz 300ohm max. 135pf20% cxa1484 sony lead cdblb455kcax33-b0 - 465.01.5khz 454.0khz 300ohm max. 135pf20% cxa1474 sony lead for safety purposes, avoid applying a direct current between the terminals. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. continued on the following page. 500k 100k 10k impedance () phase (deg) 400 420 440 460 480 500 frequency (khz) 500 50 180 50k 90 5k 0 C90 1k C180 100 c impedance curve cdbkb455kcax33-r0 100k 180 5k 90 1k 500 0 100 50 C90 C180 impedance () 380 400 420 440 460 frequency (khz) 480 10k 10 50k phase (deg) cdblb455kcay03-b0 p05e.pdf nov.24,2011 53 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 continued from the preceding page. 500k 180 50k 90 10k 5k 0 1k 500 C90 100 C180 impedance () phase (deg) 390 410 430 450 470 frequency (khz) 490 100k 50 c impedance curve cdblb455kcax15-b0 500k 180 50k 90 10k 5k 0 1k 500 C90 100 C180 impedance () phase (deg) 400 420 440 460 480 frequency (khz) 500 100k 50 cdblb455kcax25-b0 500k 100k 10k impedance () phase (deg) 400 420 440 460 480 500 frequency (khz) 500 50 180 50k 90 5k 0 C90 1k C180 100 cdblb455kcax33-b0 p05e.pdf nov.24,2011 54 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 speci ed by recovered audio characteristics part number nominal center frequency (fn) (khz) recovered audio 3db bw (khz) recovered audio output (mv) distortion (at fn) (%) distortion (%) ic ic maker type cdbkb450kcay79-r0 450 fn3.0 min. 145 40 - - tb32302fg toshiba smd cdbkb455kcay07-r0 455 fn4.0 min. 350 60 3.0 max. - mc3357 motorola smd cdbkb455kcay09-r0 455 fn4.0 min. 120 40 1.5 max. - ne604n philips smd cdbkb455kcay13-r0 455 fn4.0 min. 330 50 4.0 max. - cxa1003bm sony smd cdbkb455kcay16-r0 455 fn4.0 min. 175 40 2.0 max. - mc3372 motorola smd cdbkb455kcay24-r0 455 fn4.0 min. 100 40 2.0 max. - ta31136 toshiba smd cdbkb455kcay27-r0 455 fn4.0 min. 90 30 2.0 max. - tk10487 toko smd cdbkb455kcay28-r0 455 fn4.0 min. 40 20 3.0 max. - ta31142f toshiba smd cdbkb455kcay29-r0 455 fn4.0 min. 100 30 2.5 max. - ne605 philips smd cdbkb455kcay35-r0 455 fn4.0 min. 100 40 2.5 max. - tk10930 toko smd cdbkb455kcay40-r0 455 fn4.0 min. 40 20 3.5 max. - ta31145 toshiba smd cdbkb455kcay49-r0 455 fn4.0 min. 45 10 3.0 max. - mc3361 motorola smd cdbkb455kcay50-r0 455 fn4.0 min. 64 6.4 4.0 max. - cxa3117n sony smd cdbkb455kcay66-r0 455 fn4.2 min. 40 10 4.0 max. - njm2590 jrc smd cdbkb455kclx36-r0 455 fn13.0 min. 90 30 2.5 max. 5.0 max. [within fn 6khz] ne(sa)606/ne(sa)616 philips smd cdbkb455kclx39-r0 455 fn11.0 min. 130 20 2.5 max. 7.0 max. [within fn 8khz] ne607/ne617 philips smd cdbkb455kcly13-r0 455 fn13.0 min. 120 30 1.5 max. 5.0 max. [within fn 8khz] cxa1003bm sony smd cdblb455kcay07-b0 455 fn4.0 min. 340 60 3.0 max. - mc3357 motorola lead cdblb455kcay13a-b0 455 fn4.0 min. 350 50 3.0 max. - cxa1003bm sony lead cdblb455kcay24-b0 455 fn4.0 min. 100 40 2.0 max. - ta31136 toshiba lead cdblb455kcay28-b0 455 fn4.0 min. 40 20 3.0 max. - ta31142fn toshiba lead cdblb455kcay34-b0 455 fn4.0 min. 65 20 2.5 max. - mc13136 motorola lead cdblb455kcay40-b0 455 fn4.0 min. 40 20 3.0 max. - ta31145 toshiba lead cdblb455kcay42-b0 455 fn4.0 min. 40 15 3.0 max. - tk14590/tk14591 toko lead cdblb455kcay49-b0 455 fn4.0 min. 45 10 3.0 max. - mc3361 motorola lead cdblb455kcay50-b0 455 fn4.0 min. 64 6.4 4.0 max. - cxa3117n sony lead cdblb455kcly09-b0 455 fn15.0 min. 70 20 1.5 max. 3.5 max. [within fn 8khz] ne604n philips lead continued on the following page. p05e.pdf nov.24,2011 55 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 continued from the preceding page. part number nominal center frequency (fn) (khz) recovered audio 3db bw (khz) recovered audio output (mv) distortion (at fn) (%) distortion (%) ic ic maker type cdblb455kcly13-b0 455 fn15.0 min. 110 30 1.5 max. 5.0 max. [within fn 8khz] cxa1003bm sony lead cdblb455kcax16-b0 455 fn4.0 min. 185 40 2.0 max. - mc3372 motorola lead cdblb455kcax18-b0 455 fn3.0 min. 180 40 2.0 max. - mc3371 motorola lead cdblb455kcax36-b0 455 fn3.5 min. 100 25 3.5 max. - ne606/ne616 philips lead for safety purposes, avoid applying a direct current between the terminals. the order quantity should be an integral multiple of the "minimum quantity" shown in package page in this catalog. af output vcc 0.1 0.01 c r x 0.022 fm s. s. g. (rg = 50 ) 16 9 15 14 13 12 11 10 1 8 2 3 4 5 6 7 8.2k 10k mc3357 50 0.1 + 10 47k cdblb455kcay07-b0 cdbkb455kcay07-r0 part number (x) c r 150pf 150pf 1.5k 1.3k unit c r : f : c test circuit mc3357 16 af output vcc 0.1 47 c r x 100p 0.1 100p if input 9 15 14 13 12 11 10 1 8 2 3 4 5 6 7 0.01 0.1 + 1000p l 0.01 ne604 cdbkb455kcay09-r0 part number (x) c r cdblb455kcly09-b0 120pf 560 l 220h 120pf 1.8k C : f : unit c r ne604n 24 af output vcc 0.01 c rx 0.01 100 cxa1003bm 2700p 51k 0.01 0.01 0.01 0.01 0.01 l 100 0.01 13 14 15 16 17 18 19 20 21 22 23 1 12 11 10 9 8 7 6 5 4 3 2 0.01 cdblb455kcay13a-b0 cdbkb455kcay13-r0 part number (x) c r 82pf 82pf 1.2k 1.0k cdblb455kcly13-b0 cdbkb455kcly13-r0 l 82pf 560 220h C C if input : f : unit c r cxa1003bm af output : f : unit c r vcc 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 0.01 51 51k 0.1 510k 8.2k 0.01 r 51k 1.8k 0.1 c 0.01 0.1 (rg = 50 ) fm s. s. g 220p 68p mc3372 x cdblb455kcax16-b0 cdbkb455kcay16-r0 part number (x) c r 27pf 100pf 4.3k 1.0k mc3372 af output unit c r : f : rf input 16 9 15 14 13 12 11 10 1 8 2 3 4 5 6 7 0.01 51 51k 0.1 510k 8.2k 0.01 0.1 0.1 0.01 if input 68p 220p r x test condition vcc = +4.0v r = 6.2k x: cdblb455kcax18-b0 mc3371 vcc mc3371 af output vcc (+2.0v) 10 + xr 1 0.01 c 0.1 0.01 0.1 10 + + ta31136f 16 9 15 14 13 12 11 10 1 8 2 3 4 5 6 7 if input cdblb455kcay24-b0 cdbkb455kcay24-r0 part number (x) c r 91pf 91pf 1.5k 1.2k : f : unit c r ta31136 continued on the following page. p05e.pdf nov.24,2011 56 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 continued from the preceding page. 20 19 18 17 16 15 14 13 12 1 r c 2k vcc tk10487 0.01 10 + 0.1 0.1 0.01 0.01 8.2k 2 3 4 5 6 7 8 9 11 10 x cdbkb455kcay27-r0 part number (x) c r 33pf 1.0k : f : unit c r c test circuit tk10487 20 af output vcc 11 12 13 14 15 16 17 18 19 1 10 9 8 7 6 5 4 3 2 430 + 2.2 vcc 560p 68k 68k 3300p 68k 0.01 r 10 if input 0.01 0.1 10 + + + 10 0.1 2sc1048 0.01 ta31142f x c vcc cdblb455kcay28-b0 cdbkb455kcay28-r0 part number (x) c r 22pf 22pf 3.3k 2.7k : f : unit c r ta31142 20 af output vcc + 0.1 0.01 c 0.1 r x 0.1 150p 5n 0.1 100k 100k 22k 0.1 22 ne605 11 12 13 14 15 16 17 18 19 1 10 9 8 7 6 5 4 3 2 if input 100k cdbkb455kcay29-r0 part number (x) c r 56pf 2.2k unit c r : f : ne605 24 1 23 2 22 3 21 4 20 5 19 6 18 7 17 8 16 9 15 10 14 11 13 12 r x c vcc mc13136 0.01 0.01 0.15 1k 0.1 if input af input 0.1 0.1 0.1 + cdblb455kcay34-b0 part number (x) cr 100pf 1.2k unit c r : f : mc13136 24 1 23 2 22 3 21 4 20 5 19 6 18 7 17 8 16 9 15 10 14 11 13 12 r2 r1 c x vcc af output if input tk10930 0.01 0.1 0.1 10 + 0.1 0.1 8.2k cdbkb455kcay35-r0 part number (x) r1 r2 2.0k 1.0k c 33pf : f : unit c r tk10930 20 1 19 2 18 3 17 4 16 5 15 6 14 7 13 8 12 9 11 10 r x l if input af output c 20k 2k 8.2k vcc ne606 or ne616 0.1 0.1 0.1 0.01 0.1 0.1 2.2 + 2.2 + cdblb455kcax36-b0 cdbkb455kclx36-r0 part number (x) c r 22pf 27pf 4.7k 2.2k l C 1mh : f : unit c r ne(sa)606/616 20 af output vcc 0.1 0.01 0.01 c r x l 0.1 0.01 51 if input 11 19 18 17 16 15 14 13 12 1 10 2 3 4 5 6 7 8 9 22k 1.5k ne607/617 (philips) 8.2k +10 0.1 0.1 cdbkb455kclx39-r0 part number (x) c r 22pf 2.7k l 1mh : f : : h unit c r l ne(sa)607/617 af output 0.1 r x 0.1 1000p 100k 10 if input 3300p vcc 0.1 20 + + 10 5600p 100k + 2.2 430 + 0.01 68k 68k 68k 560p ta31145 (toshiba) 11 19 18 17 16 15 14 13 12 1 10 2 3 4 5 6 7 8 9 cdblb455kcay40-b0 cdbkb455kcay40-r0 part number (x) r 3.3k 2.7k : f : unit c r ta31145 continued on the following page. p05e.pdf nov.24,2011 57 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 continued from the preceding page. af output vcc (1.3v) 0.1 0.01 c r 0.0033 100k x if input 24 13 14 15 16 17 18 19 20 21 22 23 1 12 11 10 9 8 7 6 5 4 3 2 100k 8.2k 0.01 560p 100k 0.1 0.1 0.01 1 tk14590v (toko) 0.01 0.15 100k 100k cdblb455kcay42-b0 3.3k part number (x) c r 22pf : f : unit c r c test circuit tk14590/14591 4 7 0.01 0 . 1 vcc 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 1 22 mc3361 100p 1000p 0.1 0.1 150k 100k af output 1k r x if input 0.022 0.1 0.1 8 part number (x) cdblb455kcay49-b0 cdbkb455kcay49-r0 r 1.8k 1.5k unit c r : f : mc3361 24 22 20 19 16 15 14 13 17 21 23 1 3 5 6 9 10 11 12 8 7 4 2 1200p 1 33 0.01 1200p 1200p r x af out vcc cxa3117(sony) 18 part number (x) cdblb455kcay50-b0 cdbkb455kcay50-r0 r 8.2k 6.2k unit c r : f : cxa3117 part number (x) cdbkb455kcay66-r0 r 3.0k unit c r : f : rx 10 s.g. vcc 0.1 51 0.1 af output 10 10k 100k 100k 0.01 + + 12 3 4 5 67 11 12 1314 8 910 njm2590(jrc) njm2590 500 af output voltage (mv) t.h.d. (%) 440 450 460 470 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 c recovered audio curve cdbkb455kcay07-r0 500 af output voltage (mv) t.h.d. (%) 440 450 460 470 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50.5 10.1 cdblb455kcay07-b0 continued on the following page. p05e.pdf nov.24,2011 58 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 continued from the preceding page. 500 af output voltage (mv) t.h.d. (%) 440 450 460 470 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 c recovered audio curve cdbkb455kcay09-r0 500 af output voltage (mv) t.h.d. (%) 395 435 475 515 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 cdblb455kcly09-b0 500 af output voltage (mv) t.h.d. (%) 440 450 460 470 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 cdbkb455kcay13-r0 af output voltage (mv) 425 445 465 485 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdbkb455kcly13-r0 500 af output voltage (mv) t.h.d. (%) 440 450 460 470 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 cdblb455kcay13a-b0 500 af output voltage (mv) t.h.d. (%) 395 435 475 515 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 cdblb455kcly13-b0 continued on the following page. p05e.pdf nov.24,2011 59 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 continued from the preceding page. af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 c recovered audio curve cdbkb455kcay16-r0 af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdblb455kcax16-b0 af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdblb455kcax18-b0 af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdbkb455kcay24-r0 af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdblb455kcay24-b0 af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdbkb455kcay27-r0 continued on the following page. p05e.pdf nov.24,2011 60 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 continued from the preceding page. af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 c recovered audio curve cdbkb455kcay28-r0 af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdblb455kcay28-b0 af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdbkb455kcay29-r0 af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdblb455kcay34-b0 af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 cdbkb455kcay35-r0 af output voltage (mv) t.h.d. (%) frequency (khz) 1 10 100 500 425 445 465 486 0.1 0.5 5 50 5 50 1 10 cdbkb455kclx36-r0 continued on the following page. p05e.pdf nov.24,2011 61 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 continued from the preceding page. af output voltage (mv) 440 450 460 470 frequency (khz) 500 100 50 10 5 1 t.h.d. (%) 50.0 10.0 5.0 1.0 0.5 0.1 c recovered audio curve cdblb455kcax36-b0 frequency (khz) 425 445 465 485 500 100 50 10 5 1 50.0 10.0 5.0 1.0 0.5 0.1 af output voltage (mv) t.h.d. (%) cdbkb455kclx39-r0 500 af output voltage (mv) t.h.d. (%) 440 450 460 470 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 cdbkb455kcay40-r0 500 af output voltage (mv) t.h.d. (%) 440 450 460 470 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 cdblb455kcay40-b0 500 af output voltage (mv) t.h.d. (%) 440 450 460 470 frequency (khz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 cdblb455kcay42-b0 frequency (khz) af output voltage (mv) t.h.d. (%) 440 450 460 470 500 100 50 10 5 1 50.0 10.0 5.0 1.0 0.5 0.1 cdbkb455kcay49-r0 continued on the following page. p05e.pdf nov.24,2011 62 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 continued from the preceding page. frequency (khz) af output voltage (mv) t.h.d. (%) 440 450 460 470 500 100 50 10 5 1 50.0 10.0 5.0 1.0 0.5 0.1 c recovered audio curve cdblb455kcay49-b0 frequency (khz) af output voltage (mv) t.h.d. (%) 440 450 460 470 500 100 50 10 5 1 50.0 10.0 5.0 1.0 0.5 0.1 cdbkb455kcay50-r0 frequency (khz) af output voltage (mv) t.h.d. (%) 440 450 460 470 500 100 50 10 5 1 50.0 10.0 5.0 1.0 0.5 0.1 cdblb455kcay50-b0 frequency (khz) af output voltage (mv) t.h.d. (%) 440 450 460 470 500 100 50 10 5 1 50.0 10.0 5.0 1.0 0.5 0.1 cdbkb455kcay66-r0 speci ed by s curve characteristics part number nominal center frequency (fn) (khz) s curve (1) output volt. at fn (mv) s curve (2) at fn4.8khz (mv) ic ic maker type cdbkb455kcay54-r0 455 165 20 170 20 ta31149 toshiba smd p05e.pdf nov.24,2011 63 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 24 22 16 15 1 3 59 7 4 2 1000p 10 0.1 10 1000p 100k 0.1 r x af output 1200p 1500p vcc (+1.4v) ta31149(toshiba) 12 11 8 10 6 if input 17 2.2 430 23 21 20 vcc 100k vcc 100k vcc 19 18 14 13 + + + part number (x) cdbkb455kcay54-r0 r 2.7k unit c r : f : c test circuit ta31149 440 450 460 470 0.0 0.1 0.2 0.3 0.4 frequency (khz) volt (v) c s curve cdbkb455kcay54-r0 p05e.pdf nov.24,2011 64 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 17 ceramic discriminators for communications equipment mhz type ceramic discriminators cdscb10m7 series forms a resonator on a piezoelectric ceramic substrate. in combination with ics, this type obtains stable demodulation characteristics in a wide bandwidth. they have 1.0mm max. thickness and small mounting area (4.5x2.0mm). c features 1. compact and high reliability and recommended for automotive applications. 2. can be combined with various ics. the ic is determined by the last number in the part number. 3. stable demodulation characteristics can be obtained without adjustment. 4. stable temperature characteristics 5. available lead (pb) free solder re? ow. 4.1 max. 1.0 max. 4.50.1 0.20.2 2.00.1 0.30.2 0.4(ref.) 0.4(ref.) 1.4 max. 0.40.05 1.50.1 0.80.1 0.80.1 1.50.1 (in mm) cdscb series part number center frequency (fo) (mhz) recovered audio 3db bw (khz) recovered audio output (mv) distortion (%) s curve (mv) ic cdscb10m7ga105a-r0 10.700 30khz 220 min. 110 min. 1.5 max. - tea5757hl cdscb10m7ga113-r0 10.700 30khz 300 min. 110 min. 1.0 max. - ta2154fn cdscb10m7ga119-r0 10.700 30khz 500 min. 75 min. 1.0 max. - trf6901 cdscb10m7ga121-r0 10.700 30khz 390 min. 80 min. 1.0 max. - lv23100v cdscb10m7ga135-r0 10.700 30khz 155 min. 75 min. - - th71101 cdscb10m7ga136-r0 10.700 30khz 140 min. 120 min. - - th7122 cdscb10m7gf072-r0 10.700 (fn) fn150 min. 130 min. 2.0 max. - ta31161 cdscb10m7gf107s-r0 10.700 (fn) fn80 min. 52 min. 3.0 max. - ta31272fn cdscb10m7gf109-r0 10.700 (fn) fn100 min. 170 min. 3.0 max. - tk14588v cdscb10m7gf123-r0 10.700 (fn) - - - 900 min. ta31275fn cdscb10m7gf123s-r0 10.700 (fn) - - - 900 min. ta31275fn cdscb10m7gf126-r0 10.700 (fn) - - - 400 min. njm2295av (fn) means nominal center frequency. the order quantity should be an integral multiple of the "minimum quantity" shown in the package page. for safety purposes, avoid applying a direct current between the terminals. p05e.pdf nov.24,2011 65 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 18 48 41 42 43 44 45 46 47 13 12 20 19 18 17 16 15 14 4.7 x 150 s.s.g. vcc (3.0v) 0.1 0.47 tea5757hl (philips) + 40 21 39 22 38 23 37 24 x: cdscb10m7ga105a-r0 0.1 0.1 10 100 10 100k + + afc (n) afc (p) af out dc out 330p 0.22 11 10 9 8 7 6 5 4 3 2 1 25 26 27 28 29 30 31 32 33 34 35 36 0.1 unit c r : f : c test circuit cdscb10m7ga105a-r0 30 23 24 25 26 27 28 29 1 8 7 6 5 4 3 2 2.2 d.c. out s.s.g. vcc (1.2v) af out 0.01 0.01 0.01 0.01 680p ta2154fn (toshiba) + 22 9 21 10 20 11 19 12 18 13 17 14 16 15 x: cdscb10m7ga113-r0 0.01 x unit c r : f : cdscb10m7ga113-r0 0.01 0.01 0.01 0.01 0.01 0.47 2.2 0.1 0.1 0.22 4.7 120p 220k 68p 15p 82p 47p 1000p 100p 100p 10k 10k 1k + 10 if input af output vcc (3.0v) (texas instruments) trf6901 pic16f84 x unit c r l : f : : h + x: cdscb10m7ga119-r0 1 2 3 4 5 6 7 8 9 10 11 12 36 35 34 33 32 31 30 29 28 27 26 25 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 18 17 16 15 14 13 12 11 10 123456789 cdscb10m7ga119-r0 0.47 0.01 af output d.c. output lv23100v (sanyo) pic16f84 (control ic) 10k 10k 10k vcc (3.2v) 1 0.047 0.047 2.2 0.1 1k 0.047 10k 75 0.015 0.01 100 10p 100p 10p 22 10 3.3k + 1 + + + + + + s.g. x unit c r : f : x: cdscb10m7ga121-r0 36 35 34 33 32 31 30 2829 27 26 25 24 23 22 21 20 19 1234567 9 8 101112131415161718 18 1 17 2 16 3 15 4 14 5 13 6 12 7 10 9 11 8 cdscb10m7ga121-r0 unit c r : f : x: cdscb10m7ga135-r0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 220k 0.01 0.01 1000p 0.1 0.01 1000p 100p 330p 0.033 12p 0.01 0.01 0.01 1000p c.d. 330p 10 + s.g. vcc (5.0v) th71101, th71102, th71111 or th71112 (melexis) fks-out af-out 330k cdscb10m7ga135-r0 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 unit c r : f : x: cdscb10m7ga136-r0 0.1 2.2 1k 100k 3.3k + 0.1 100p 10k pic16f84 (control ic) th7122 [internal afc enabled] (melexis) vcc (5.0v) 0.01 0.01 0.1 0.01 330p 330p 100k 330p s.g. c.d. fks-out af-out 330p 330p 0.01 cdscb10m7ga136-r0 continued on the following page. p05e.pdf nov.24,2011 66 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 18 continued from the preceding page. 16 vcc (3v) 9 10 11 12 13 14 15 1 8 7 6 5 4 3 2 if in af out 0.01 33 0.01 r 10p 4.7 x 0.01 0.01 0.01 + ta31161 (toshiba) x: cdscb10m7gf072-r0 r: 820 unit c r l : f : : h c test circuit cdscb10m7gf072-r0 vcc (5.0v) + 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 0.01 ta31272fn (toshiba) af output c.d. 0.01 0.01 1000p 100 0.01 0.01 0.01 1.2k c.d.: ceramic discriminator unit r c l : : f : h s.s.g. cdscb10m7gf107s-r0 0.01 0.01 vcc (3v) 12k 51k 1000p 8p + s.s.g. r d.c. out af out x 0.01 0.01 0.01 0.01 4.7 51 0.01 1.2 tk14588v (toko) unit c r l : f : : h x: cdscb10m7gf109-r0 r: 820 9 10 11 12 13 14 15 16 8 7 6 5 4 3 2 1 cdscb10m7gf109-r0 vcc (5.0v) 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 0.1 0.01 ta31275fn (toshiba) 1000p 3300p 0.01 af out dc-out 0.01 0.01 0.1 0.1 0.1 1.8k 0.01 x: cdscb10m7gf123-r0 unit c r : f : s.s.g. cdscb10m7gf123-r0 vcc (5.0v) 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 njm2295av (jrc) 0.01 dc-out 100p 0.01 10 0.01 10 180 8p c.d. 0.01 x: cdscb10m7gf126-r0 unit c r : f : s.g. + + 10 + 10 + cdscb10m7gf126-r0 p05e.pdf nov.24,2011 67 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 18 af output voltage (mv) t.h.d. (%) frequency (mhz) input fdev. fmod. vcc = 100db = 75khz = 1khz = 3.0v 1 10 100 1000 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 0.1 1 10 100 af output distortion c recovered audio curve cdscb10m7ga105a-r0 af output voltage (mv) t.h.d. (%) frequency (mhz) input fdev. fmod. vcc = 100db = 75khz = 1khz = 1.2v 1 10 100 1000 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 0.1 1 10 100 af output distortion cdscb10m7ga113-r0 af output voltage (mv) t.h.d. (%) frequency (mhz) input fdev. fmod. vcc = 100db = 60khz = 1khz = 3.0v 1 10 100 1000 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 0.1 1 10 100 af output distortion cdscb10m7ga119-r0 af output voltage (mv) t.h.d. (%) frequency (mhz) input fdev. fmod. vcc = 100db = 75khz = 1khz = 3.2v 1 10 100 1000 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 0.1 1 10 100 af output distortion cdscb10m7ga121-r0 af output voltage (mv) frequency (mhz) input fdev. fmod. vcc = 100db = 50khz = 1khz = 5.0v 1 10 100 1000 10.4 10.5 10.6 10.7 10.8 10.9 11.0 0.1 cdscb10m7ga135-r0 af output voltage (mv) frequency (mhz) input fdev. fmod. vcc = 100db = 50khz = 1khz = 5.0v 1 10 100 1000 10.4 10.5 10.6 10.7 10.8 10.9 11.0 0.1 cdscb10m7ga136-r0 continued on the following page. p05e.pdf nov.24,2011 68 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 18 continued from the preceding page. af output voltage (mv) t.h.d. (%) frequency (mhz) 100 10 1000 100 10 1 10 . 1 10.3 10.5 10.7 10.9 11.1 10.4 10.6 10.8 11.0 input fdev. fmod. vcc = 100db = 80khz = 1khz = 3.0v c recovered audio curve cdscb10m7gf072-r0 input fdev. fmod. vcc = 100db = 64khz = 1khz = 3.0v af output voltage (mv) t.h.d. (%) frequency (mhz) 1000 100 10 1 100 10 1 0.1 10.3 10.5 10.7 10.9 11.1 10.4 10.6 10.8 11.0 cdscb10m7gf109-r0 volt (v) frequency (mhz) 0.5 0.0 1.0 1.5 2.0 2.5 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 c s curve cdscb10m7gf123-r0 volt (v) frequency (mhz) 1.0 2.0 3.0 4.0 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 cdscb10m7gf126-r0 p05e.pdf nov.24,2011 69 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 18 ceramic discriminators notice 1. standard reflow soldering conditions (1) reflow cfc alternatives (hcfc series), isopropyl alcohol (ipa), water (demineralized water), cleaning water solution (cleanthrough-750h, pine alpha 100s), silicon (technocare frw) 2. wash (1) cleaning solvent o immersion wash 2 minutes max. in above solvent at +60c max. o shower or rinse wash 2 minutes max. in above solvent at +60c max. (2) cleaning conditions o when components are immersed in solvent, be sure to maintain the temperature of components below the temperature of solvent. o please do not use ultrasonic cleaning. o total washing time should be within 4 minutes. o please ensure the component is thoroughly evaluated in your application circuit. o please do not use chlorine, petroleum or alkaline cleaning solvents. o if you plan to use any other type of solvents, please consult with murata or murata representative prior to using. (3) notice electrode is directly soldered with the tip of soldering iron at +3505c for 3.00.5 seconds. (2) soldering iron peak (260c max.) heating (230c) gradual cooling pre-heating (150-180c) 100 230 260 temperature (c) 60-120 sec. 40 sec. max. 30 sec. min. 120 sec. min. filter is soldered twice within the following temperature conditions. c cdbkb series notice (soldering and mounting) continued on the following page. c cdbkb series notice (handling) p05e.pdf nov.24,2011 70 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 1. the component will be damaged when an excessive stress is applied. 2. if the component is cleaned, please con? rm that the reliability has not been degraded. 3. in case of covering ? lter with over coating, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 4. do not use strong acidity ? ux, more than 0.2wt% chlorine content, in re? ow soldering. 5. the product, packed in a moisture-proof bag (dry pack), is sensitive to moisture. the following treatment is required before applying re? ow soldering, to avoid package cracks or reliability degradation caused by thermal stress. when unpacked, store the component in an atmosphere of below 25 degrees c. and below 65%r.h., and solder within 48 hours. ceramic discriminators notice c cdblb series notice (handling) continued from the preceding page. p05e.pdf nov.24,2011 71 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. 1. do not use this product with bend. the component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. the component will be damaged when an excessive stress is applied. 3. no type of re? ow soldering should be applied to this component. 4. do not clean or wash the component as it is not hermetically sealed. 5. do not use strong acidity ? ux, more than 0.2wt% chlorine content, in ? ow soldering. 6. in case of covering discriminator with over coating, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. ceramic discriminators notice continued on the following page. filter is soldered twice within the following temperature conditions. 1. standard reflow soldering conditions (1) reflow filter is soldered at +3005c for 3.00.5 seconds. the soldering iron should not touch the filter while soldering. (2) soldering iron the component is recommended with placement machines that employ optical placement capabilities. the component might be damaged by excessive mechanical force. please make sure that you have evaluated by using placement machines before going into mass production. do not use placement machines that utilize mechanical positioning. please contact murata for details beforehand. (3) condition for placement machines (a) the component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) design layout of components on the pc board to minimize the stress imposed on the warp or flexure of the board. (c) after installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. to prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) when the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. careful checking and maintenance are necessary to prevent unexpected trouble. (e) when correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. depending on the soldering conditions, the effective area of terminations may be reduced. solder containing ag should be used to prevent the electrode erosion. (4) other o soldering and mounting temperature (c) 100 230 260 30 sec. min. 40 sec. max. peak (260c max.) pre-heating (150-180c) heating (230c) gradual cooling 120 sec. min. 60-120 sec. [component direction] [component layout close to board] place the component laterally to the direction in which stress acts. susceptibility to stress is in the order of : a>c>b b a c slit perforation c cdscb series notice p05e.pdf nov.24,2011 72 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. ceramic discriminators notice o storage and operating conditions o rating the component may be damaged if excessive mechanical stress is applied. o handling 1. accurate test circuit values are required to measure electrical characteristics. miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. for safety purposes, avoid applying a direct current between the terminals. 1. product storage condition please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. please store the products under the following conditions: temperature: -10 to +40c humidity: 15 to 85% r.h. 2. expiration date on storage expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. please use the products within six months after delivery. if you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. please confirm solderability and characteristics for the products regularly. 3. notice on product storage (1) please do not store the products in a chemical atmosphere (acids, alkali, bases, organic gas, sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) please do not drop the products to avoid cracking of ceramic element. 4. other please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. continued from the preceding page. do not clean or wash the component as it is not hermetically sealed. 2. wash in case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. coating p05e.pdf nov.24,2011 73 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. ceramic discriminators standard land pattern dimensions/packaging (in mm) 1.2 1.2 2.0 4.9 2.6 c standard land pattern dimensions cdbkb series 2.6 1.0 2.0 1.0 3.0 (in mm) cdscb series part number taping ?180mm bulk 500 2000 500 cdbkb series cdblb series cdscb series (pcs.) the order quantity should be an integral multiple of the "minimum quantity" shown above. c minimum quantity user direction of feed cover film 3 max. +0.1 -0.0 +1.0 -0 +0 -3.0 dimensions of carrier tape dimensions of reel (in mm) leader cover film empty empty components trailer 160 to 190 160 to 200 400 to 560 (?60 ) (?180 ) 17.00.3 4.00.1 7.50.1 1.750.1 16.00.15 3.30.1 7.20.1 8.00.1 6.30.1 2.00.1 19.41.0 ?13.00.5 ?1.5 2.00.2 s 0 a r t n u m b e r m a r k e d s i d e i s a l w a y s f a c i n g u p c cdbkb series continued on the following page. p05e.pdf nov.24,2011 74 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. ceramic discriminators standard land pattern dimensions/packaging continued from the preceding page. 4.00.1 cover film 4.00.1 2.00.05 12.00.2 (9.0) ?1.5 +0.1 -0 ?1.5 +0.1 -0 5.50.05 1.750.1 4.70.1 user direction of feed s 0 a r t n u m b e r m a r k e d s i d e i s a l w a y s f a c i n g u p 0.30.05 m a x 1.10.1 (3) 2.20.1 0 e e l i n g s t r e n g t h 0.1 to 0.7n 10 dimension of reel ( ): reference (in mm) ?13.00.2 2.00.5 17.01.0 180 +0.1 -1.5 60 +0.1 -0 240 to 280 400 to 560 160 to 190 % m p t y # o m p o n e n t s cover film % m p t y 4 r a i l e r , e a d e r 13.0 +1.0 -0 $ i m e n s i o n s o f # a r r i e r 4 a p e c cdscb series p05e.pdf nov.24,2011 75 ! note ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. ! note p05e.pdf nov.24,2011 ? please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ? this catalog has only typical speci? cations because there is no space for detailed speci? cations. therefore, please review our product speci? cations or consult the approval sheet for product speci? cations before ordering. |
Price & Availability of CFUKG455KH1X-R0
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |